Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Krieghoff Trumpf 16x16x8jrs

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

brosteve
.224 member

Reged: 23/11/11
Posts: 39
Loc: TX USA

Re: Krieghoff Trumpf 16x16x8jrs
01/02/13 03:09 PM

Don, I have just been down that road with my Funk Jubilaum drilling. My mounts are identical, except that both measurements on mine are 15mm. No matter. The CZ 527 were the route I took. I had to file off 1 mm, and they are tight, tight! The cZ rings are 16mm--so you are done on one, EXCEPT for the recoil stop on the base of the ring. It is square. The temptation will be to file it off and be done. There is a better way. It will not be perfectly aligned with the half round recoil stops you now have, BUT you can still file part of it to fit, and it will still function as a recoil stop. I don't expect it to shift given the caliber (same as mine). Hopefully the bases on the barrel are soldered in place so that a blow to the scope cannot shift a dovetail around. Take your time, and the CZ rings are an easy fix. Mine have been ABSOLUTELY perfect in returning to zero.
I cannot comment on tikka rings, having never seen them. The only complication you have is that one dovetail is 16mm, and one is 15mm, but I can tell you that the CZ rings can be filed on the one side where the loose dovetail is tightened with the screw. Mine works great...good luck with yours...Steve

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Krieghoff Trumpf 16x16x8jrs	DonT	01/02/13 02:08 AM
Re: Krieghoff Trumpf 16x16x8jrs	brosteve	01/02/13 03:09 PM
Re: Krieghoff Trumpf 16x16x8jrs	brosteve	01/02/13 03:13 PM
Re: Krieghoff Trumpf 16x16x8jrs	DonT	02/02/13 03:56 AM
Re: Krieghoff Trumpf 16x16x8jrs	brosteve	04/02/13 12:25 PM
Re: Krieghoff Trumpf 16x16x8jrs	DonT	05/02/13 08:02 AM
Re: Krieghoff Trumpf 16x16x8jrs	DonT	12/02/13 08:07 AM
Re: Krieghoff Trumpf 16x16x8jrs	brosteve	13/02/13 03:17 PM
Re: Krieghoff Trumpf 16x16x8jrs	DonT	14/02/13 02:08 PM
Re: Krieghoff Trumpf 16x16x8jrs	xausa	20/03/13 12:58 PM
Re: Krieghoff Trumpf 16x16x8jrs	DonT	21/03/13 03:00 AM
Re: Krieghoff Trumpf 16x16x8jrs	brosteve	16/02/13 03:40 PM
Re: Krieghoff Trumpf 16x16x8jrs	SAHUNT	16/02/13 10:22 PM
Re: Krieghoff Trumpf 16x16x8jrs	DonT	18/02/13 04:36 AM
Re: Krieghoff Trumpf 16x16x8jrs	xausa	18/02/13 07:27 AM
Re: Krieghoff Trumpf 16x16x8jrs	brosteve	21/02/13 09:26 AM
Re: Krieghoff Trumpf 16x16x8jrs	DonT	22/02/13 06:23 AM

Extra information

0 registered and 83 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 10150

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved