Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 10 gauge 31/2" wads

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Shotguns

TomN
.300 member

Reged: 07/03/10
Posts: 149
Loc: washington

Re: 10 gauge 31/2" wads
04/01/13 09:55 AM

Daryl
Yes it's a 10 bore I have tryed the .715's and I got some .748's but when I put them in the cut back shot cup they tend to bulage the shot cut and the shell so as not to load. What I am hearing you say is to cut the fingers off the shot cup and turn it over and use the cup at the bottom of the shot cup and keep the flat part on the fiber wads or should I just cut the cup off the shot cup and put it right on the fiber wads? The 690 would fit insied the shot cup with the fingers cut off to just mid ball and seam to hold it in the center the others I have seam to be to big to do that but if I should be turning it over I would use the .748 ball and hope the presser would keep it centerd as it looked to small to fill the cup and seams to let the ball roll arown inside of the cup on the bottom of the shot cup thanks.

Tom N

Post Extras

Entire topic
Subject	Posted by	Posted on
10 gauge 31/2" wads	TomN	22/12/12 12:32 PM
Re: 10 gauge 31/2" wads	DarylS	22/12/12 12:44 PM
Re: 10 gauge 31/2" wads	TomN	22/12/12 01:10 PM
Re: 10 gauge 31/2" wads	lancaster	23/12/12 12:46 AM
Re: 10 gauge 31/2" wads	Kiwi_bloke	31/12/12 01:49 PM
Re: 10 gauge 31/2" wads	TomN	01/01/13 06:09 PM
Re: 10 gauge 31/2" wads	DarylS	02/01/13 06:02 AM
Re: 10 gauge 31/2" wads	TomN	02/01/13 06:46 AM
Re: 10 gauge 31/2" wads	TomN	03/01/13 12:27 PM
Re: 10 gauge 31/2" wads	DarylS	04/01/13 02:51 AM
Re: 10 gauge 31/2" wads	TomN	04/01/13 04:36 AM
Re: 10 gauge 31/2" wads	DarylS	04/01/13 05:11 AM
Re: 10 gauge 31/2" wads	TomN	04/01/13 09:55 AM
Re: 10 gauge 31/2" wads	DarylS	04/01/13 10:28 AM
Re: 10 gauge 31/2" wads	TomN	05/01/13 11:55 AM
Re: 10 gauge 31/2" wads	DarylS	06/01/13 04:53 AM

Extra information

1 registered and 11 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4494

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact