Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: shop built stock duplicator

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

bouldersmith
.375 member

Reged: 23/03/06
Posts: 626
Loc: Boulder Colorado

Re: shop built stock duplicator
02/01/13 06:30 AM

We built it in our shop. We modified a design that had been successful in the past. The black tube is filled with lead to counter balance the front assembly. Most of the parts we bought came from ebay, or from the net. The router ebay, same with the cam followers, Thompson bearings etc. We can get very good results on inletting with this machine. I usually leave about .050" on the outside and .005" on inletting depth, .005" to .010" on the sides.
Steve

--------------------
New website http://www.bertramandco.com

Post Extras

Entire topic
Subject	Posted by	Posted on
shop built stock duplicator	bouldersmith	15/12/12 10:18 PM
Re: shop built stock duplicator	Birdhunter50	02/01/13 02:09 AM
Re: shop built stock duplicator	bouldersmith	02/01/13 06:30 AM
Re: shop built stock duplicator	tinker	02/01/13 06:37 AM
Re: shop built stock duplicator	Altamaha	10/01/13 11:33 AM

Extra information

0 registered and 113 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2126

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact