Home | Ezine | Forums | Links | Contact
NitroExpress.com: 8x51 ???

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

DarylS
.700 member


Reged: 10/08/05
Posts: 27005
Loc: Beautiful British Columbia, Ca...
Re: 8x51 ??? No, really a 8x54mm Krag
      25/12/12 03:20 AM

Now I'm confused- is it 8x63 or 8x54?

If actually 8x54, and a fellow has an improved '08 case reamer with a .454" shoulder, the pilot could be bushed or changed to run in the .313" to .315" bore and open up the shoulder to .454". Any '08 IMP reamer will work as you don't need the neck cut, it's already there. Improving the chamber would increase the case capacity to about 60 or 61gr., same as the .284 case provides - just a thought for a unique chambering that no one else is likely to have at this time - ie: 8x54 Improved Krag. Mention that and everyone will be thinking of the .30/40 Krag case - no, no,no, it's actually ------- lots of fun.

If you went this way, a .308 die set would work, if opened up just a bit in the base as well as the neck.
Actually, the seater might have the correct neck size already - just a thought for a newish wildcat.

The ballistics would be quite similar to the .325 WSM, ie: 175gr. at 3,000fps. The shoulder would be increased from .435" to .454" - a full .020", along with the reduction in taper - a great little round.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 8x51 ??? Caprivi 26/11/12 09:51 AM
. * * Re: 8x51 ??? lancaster   26/11/12 06:01 PM
. * * Re: 8x51 ??? Caprivi   27/11/12 01:59 AM
. * * Re: 8x51 ??? Igorrock   27/11/12 06:31 AM
. * * Re: 8x51 ??? lancaster   28/11/12 06:34 AM
. * * Re: 8x51 ??? Caprivi   28/11/12 02:11 AM
. * * Re: 8x51 ??? lancaster   28/11/12 06:38 AM
. * * Re: 8x51 ??? Huvius   28/11/12 09:52 AM
. * * Re: 8x51 ??? DarylS   28/11/12 09:57 AM
. * * Re: 8x51 ??? StephenCoker   28/11/12 10:19 AM
. * * Re: 8x51 ??? Caprivi   28/11/12 03:06 PM
. * * Re: 8x51 ??? StephenCoker   28/11/12 03:26 PM
. * * Re: 8x51 ??? Caprivi   28/11/12 03:33 PM
. * * Re: 8x51 ??? Caprivi   28/11/12 03:44 PM
. * * Re: 8x51 ??? eagle27   28/11/12 04:18 PM
. * * Re: 8x51 ??? Caprivi   29/11/12 02:24 AM
. * * Re: 8x51 ??? DarylS   29/11/12 02:36 AM
. * * Re: 8x51 ??? Caprivi   22/12/12 03:40 PM
. * * Re: 8x51 ??? Igorrock   22/12/12 05:57 PM
. * * Re: 8x51 ??? lancaster   22/12/12 11:43 PM
. * * Re: 8x51 ??? DarylS   23/12/12 03:14 AM
. * * Re: 8x51 ??? No, really a 8x54mm Krag Caprivi   23/12/12 03:38 PM
. * * Re: 8x51 ??? No, really a 8x54mm Krag Caprivi   23/12/12 03:57 PM
. * * Re: 8x51 ??? No, really a 8x54mm Krag DarylS   24/12/12 03:07 AM
. * * Re: 8x51 ??? No, really a 8x54mm Krag Caprivi   24/12/12 07:30 AM
. * * Re: 8x51 ??? No, really a 8x54mm Krag DarylS   24/12/12 10:18 AM
. * * Re: 8x51 ??? No, really a 8x54mm Krag Caprivi   24/12/12 01:16 PM
. * * Re: 8x51 ??? No, really a 8x54mm Krag Igorrock   24/12/12 04:35 PM
. * * Re: 8x51 ??? No, really a 8x54mm Krag Caprivi   25/12/12 02:24 AM
. * * Re: 8x51 ??? No, really a 8x54mm Krag DarylS   25/12/12 03:20 AM
. * * Re: 8x51 ??? No, really a 8x54mm Krag Caprivi   25/12/12 06:53 AM
. * * Re: 8x51 ??? No, really a 8x54mm Krag DarylS   25/12/12 08:09 AM
. * * Re: 8x51 ??? No, really a 8x54mm Krag Igorrock   26/12/12 12:27 AM
. * * Re: 8x51 ??? No, really a 8x54mm Krag Caprivi   26/12/12 04:04 AM
. * * Re: 8x51 ??? No, really a 8x54mm Krag Caprivi   30/12/12 02:31 PM
. * * Re: 8x51 ??? No, really a 8x54mm Krag Caprivi   08/05/13 02:20 PM
. * * Re: 8x51 ??? No, really a 8x54mm Krag Caprivi   24/05/13 01:45 PM

Extra information
0 registered and 544 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 27663

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved