Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Daniel Fraser Stock removal - How is it attached.

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

buckstix
.400 member

Reged: 07/11/12
Posts: 1410
Loc: Whitetail Country

Re: Daniel Fraser Stock removal - How is it attached.
21/12/12 10:38 AM

Hello MikeRowe,
Hello StephenCoker,

Well, since we were in the midst of a Blizzard with 14+ inches of snow and 50 MPH wind gusts, I had time to do a lot of thinking.

And, since you guys kind-of talked me into it .... here is how it went.

I used a greased "seam splitter" sewing tool to carefully "circle" the recoil pad plugs. Would you believe they were "glued" in. Fortunately the old glue was brittle, and flaked away as I circled each plug. I was so careful I almost passed out "twice" from holding my breath. Luckily the pad was not glued on, and came right off.

I could feel a little wiggle in the draw bolt, and could tighten it 1/2 turn. I removed it, measured the threads, .040 each, and placed a .020 copper washer under the head and re-installed it. While I was in the works, which were all 24K Gold plated by the way, I used a high pressure grease on the pressure points of the trigger parts.

After all was re-assembled, it looked like I had never been inside. This undertaking went 100% perfect! With the sears slicked up, the trigger pulls are now a very smooth 6 & 7 pounds.

--------------------
"You never pay too much for something, you only buy it too early."

Edited by CptCurl (21/12/12 10:58 PM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Daniel Fraser Stock removal - How is it attached.	buckstix	12/12/12 02:43 AM
Re: Daniel Fraser Stock removal - How is it attached.	StephenCoker	12/12/12 03:02 AM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	12/12/12 04:25 AM
Re: Daniel Fraser Stock removal - How is it attached.	StephenCoker	12/12/12 07:49 AM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	12/12/12 08:26 AM
Re: Daniel Fraser Stock removal - How is it attached.	Claydog	12/12/12 02:02 PM
Re: Daniel Fraser Stock removal - How is it attached.	StephenCoker	13/12/12 03:20 AM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	13/12/12 05:53 AM
Re: Daniel Fraser Stock removal - How is it attached.	MikeRowe	13/12/12 01:53 PM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	13/12/12 10:24 PM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	20/12/12 02:34 PM
Re: Daniel Fraser Stock removal - How is it attached.	MikeRowe	20/12/12 02:39 PM
Re: Daniel Fraser Stock removal - How is it attached.	CptCurl	20/12/12 10:36 PM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	20/12/12 11:00 PM
Re: Daniel Fraser Stock removal - How is it attached.	AkMike	20/12/12 11:15 PM
Re: Daniel Fraser Stock removal - How is it attached.	CptCurl	20/12/12 11:50 PM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	21/12/12 12:11 AM
Re: Daniel Fraser Stock removal - How is it attached.	MikeRowe	21/12/12 04:03 AM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	21/12/12 10:38 AM
Re: Daniel Fraser Stock removal - How is it attached.	MikeRowe	21/12/12 12:40 PM
Re: Daniel Fraser Stock removal - How is it attached.	StephenCoker	23/12/12 02:58 PM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	23/12/12 08:46 PM
Re: Daniel Fraser Stock removal - How is it attached.	CptCurl	20/12/12 11:54 PM
Re: Daniel Fraser Stock removal - How is it attached.	CptCurl	20/12/12 11:55 PM

Extra information

0 registered and 33 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7534

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved