Home | Ezine | Forums | Links | Contact
NitroExpress.com: Daniel Fraser Stock removal - How is it attached.

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

MikeRowe
.333 member


Reged: 23/11/11
Posts: 479
Loc: Arkansas, USA
Re: Daniel Fraser Stock removal - How is it attached.
      21/12/12 04:03 AM

The plug going into the bottom of the stock at right angles to the lower recoil pad screw is filling the hole where the original Fraser sling eye was placed. They are a normal eye, but set almost flush with the toe line of the stock.

If you want to tighten the through bolt, the pad will have to come off so the bolt can be taken out. A different thickness washer will have to be used under the head so the hole for the hand pin will line up. If the stock or bolt is even the slightest bit loose, it needs to be done.

You may as well do the triggers then.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Daniel Fraser Stock removal - How is it attached. buckstix 12/12/12 02:43 AM
. * * Re: Daniel Fraser Stock removal - How is it attached. StephenCoker   12/12/12 03:02 AM
. * * Re: Daniel Fraser Stock removal - How is it attached. buckstix   12/12/12 04:25 AM
. * * Re: Daniel Fraser Stock removal - How is it attached. StephenCoker   12/12/12 07:49 AM
. * * Re: Daniel Fraser Stock removal - How is it attached. buckstix   12/12/12 08:26 AM
. * * Re: Daniel Fraser Stock removal - How is it attached. Claydog   12/12/12 02:02 PM
. * * Re: Daniel Fraser Stock removal - How is it attached. StephenCoker   13/12/12 03:20 AM
. * * Re: Daniel Fraser Stock removal - How is it attached. buckstix   13/12/12 05:53 AM
. * * Re: Daniel Fraser Stock removal - How is it attached. MikeRowe   13/12/12 01:53 PM
. * * Re: Daniel Fraser Stock removal - How is it attached. buckstix   13/12/12 10:24 PM
. * * Re: Daniel Fraser Stock removal - How is it attached. buckstix   20/12/12 02:34 PM
. * * Re: Daniel Fraser Stock removal - How is it attached. MikeRowe   20/12/12 02:39 PM
. * * Re: Daniel Fraser Stock removal - How is it attached. CptCurlAdministrator   20/12/12 10:36 PM
. * * Re: Daniel Fraser Stock removal - How is it attached. buckstix   20/12/12 11:00 PM
. * * Re: Daniel Fraser Stock removal - How is it attached. AkMike   20/12/12 11:15 PM
. * * Re: Daniel Fraser Stock removal - How is it attached. CptCurlAdministrator   20/12/12 11:50 PM
. * * Re: Daniel Fraser Stock removal - How is it attached. buckstix   21/12/12 12:11 AM
. * * Re: Daniel Fraser Stock removal - How is it attached. MikeRowe   21/12/12 04:03 AM
. * * Re: Daniel Fraser Stock removal - How is it attached. buckstix   21/12/12 10:38 AM
. * * Re: Daniel Fraser Stock removal - How is it attached. MikeRowe   21/12/12 12:40 PM
. * * Re: Daniel Fraser Stock removal - How is it attached. StephenCoker   23/12/12 02:58 PM
. * * Re: Daniel Fraser Stock removal - How is it attached. buckstix   23/12/12 08:46 PM
. * * Re: Daniel Fraser Stock removal - How is it attached. CptCurlAdministrator   20/12/12 11:54 PM
. * * Re: Daniel Fraser Stock removal - How is it attached. CptCurlAdministrator   20/12/12 11:55 PM

Extra information
0 registered and 11 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7537

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved