Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Husky M98 FN Browning in 9,3x62 to .404 Jeffery

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Sauercollector
.224 member

Reged: 03/02/10
Posts: 21
Loc: PacNW

Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery
18/12/12 01:21 PM

I have just had a .404 built on SSB Mauser 98 which was originally chambered in 30-06. The suggestions noted above are on the mark regarding the amount of time and money required to do a custom build. I was fortunate in several ways regarding my project as the action that was purchased had original styled scope rings which were sized for a 30mm scope. Ended up picking up a used Swarvoski in in 2.5-6x in fairly good (useable-not mint) condition for a fair price. A Chrome Moly Krieger bbl was ordered and purchased (6 month wait) and new bottom metal and follower from Duane Weibe was purchased along with a new 3 position safety and new trigger from two different vendors. Then all of the components were sent off to a well regarded gunsmith/gun builder who agreed to take on the project but only to do the metal work (barrel install with chambering, bottom metal fit, trigger install and adjust) and to open up the rails for feeding and chambering. Also had a three leaf rear and ramped front sight installed by the same builder. This has been about an 18 month project thus far and I am supposed to get the completed metal back the week after Christmas 2012. All in all unless you really have the time and $$$ to do the project right I would go with what is suggested above (CZ etc). Actually, and if you are a patient sort, .404 '98 Mausers will occasionally pop up for sale at US auction houses and these can be purchased much more inexpensively than do a custom build on a '98 action. You may ask why I took the time and spent the money for the project noted above. The answer is easy. It was because the action that I used is an original factory single square bridge Mauser 98(it was sans barrel) with those 30 mm rings. All in all a incredibly rare find and what better way to bring an old action back to life but to have it done up in a truly classic low pressure African cartridge. The .404 Jeffery. It was a natural choice and I don't regret it one bit. Jeff S.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Husky M98 FN Browning in 9,3x62 to .404 Jeffery	Bonde	15/12/12 08:46 AM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	Caprivi	17/12/12 03:02 AM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	DarylS	17/12/12 03:46 AM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	Sauercollector	18/12/12 01:21 PM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	Bonde	31/12/12 04:52 AM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	Igorrock	31/12/12 05:30 AM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	Bonde	31/12/12 09:33 AM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	grandveneur	31/12/12 08:30 PM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	lancaster	31/12/12 10:02 PM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery DELETED	grandveneur	31/12/12 11:04 PM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	Bonde	01/01/13 12:02 PM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	eagle27	01/01/13 02:20 PM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	Bonde	02/01/13 05:35 AM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	kuduae	02/01/13 06:55 AM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	kamilaroi	31/12/12 09:32 PM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	eagle27	31/12/12 06:48 PM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	tophet1	15/12/12 01:53 PM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	albertan	15/12/12 06:00 PM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	Bonde	15/12/12 09:22 PM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	ozhunter	16/12/12 07:30 AM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	Bonde	16/12/12 07:55 AM
Re: Husky M98 FN Browning in 9,3x62 to .404 Jeffery	eagle27	16/12/12 10:09 AM

Extra information

0 registered and 385 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 13598

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved