Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Daniel Fraser Stock removal - How is it attached.

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

buckstix
.400 member

Reged: 07/11/12
Posts: 1411
Loc: Whitetail Country

Re: Daniel Fraser Stock removal - How is it attached.
12/12/12 04:25 AM

Hello StephenCoker,

Thank you so much for your reply. I assume by your answer that Fraser Double Rifles do have a "Through-bolt" system.

I would have a few questions,

1. What is the "hand pin"? Is this the screw under the triggerguard that comes up from the bottom and goes into the end of the top tang? Or is it something else?

2. Are the through bolts typically centered in the stock, between the recoil pad attaching screws?

3. How far from the butt end of the stock (beneath the recoil pad) is the end of the through bolt? Is it near the end, or far into the stock?

4. Does the through bolt have a turn-screw slot to loosen and tighten it, or a square head?

Here are the reasons for all my questions. The stock on my rifle with its Red rubber recoil pad looks like it has never been removed, or at least not in the last 75 years. Hence, the recoil pad with its 2 matching rubber plugs over the two attaching screws, has taken on a smooth polished vintage surface wherein the plugs are barely visible without a magnifing glass. Also, the joint of the pad to the wood has a similarly "aged" polished junction that would be difficult to rejoin.

I hate to disturb these wonderful features just to adjust the triggers. I'm considering living with the 8 & 9 pound triggers rather than disturbing the recoil pad. Or, perhaps adding a small center hole through the pad to acess the through-bolt, and then plugging that hole with something that is removeable.

I'd appreciate your answers and thoughts.

--------------------
"You never pay too much for something, you only buy it too early."

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Daniel Fraser Stock removal - How is it attached.	buckstix	12/12/12 02:43 AM
Re: Daniel Fraser Stock removal - How is it attached.	StephenCoker	12/12/12 03:02 AM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	12/12/12 04:25 AM
Re: Daniel Fraser Stock removal - How is it attached.	StephenCoker	12/12/12 07:49 AM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	12/12/12 08:26 AM
Re: Daniel Fraser Stock removal - How is it attached.	Claydog	12/12/12 02:02 PM
Re: Daniel Fraser Stock removal - How is it attached.	StephenCoker	13/12/12 03:20 AM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	13/12/12 05:53 AM
Re: Daniel Fraser Stock removal - How is it attached.	MikeRowe	13/12/12 01:53 PM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	13/12/12 10:24 PM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	20/12/12 02:34 PM
Re: Daniel Fraser Stock removal - How is it attached.	MikeRowe	20/12/12 02:39 PM
Re: Daniel Fraser Stock removal - How is it attached.	CptCurl	20/12/12 10:36 PM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	20/12/12 11:00 PM
Re: Daniel Fraser Stock removal - How is it attached.	AkMike	20/12/12 11:15 PM
Re: Daniel Fraser Stock removal - How is it attached.	CptCurl	20/12/12 11:50 PM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	21/12/12 12:11 AM
Re: Daniel Fraser Stock removal - How is it attached.	MikeRowe	21/12/12 04:03 AM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	21/12/12 10:38 AM
Re: Daniel Fraser Stock removal - How is it attached.	MikeRowe	21/12/12 12:40 PM
Re: Daniel Fraser Stock removal - How is it attached.	StephenCoker	23/12/12 02:58 PM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	23/12/12 08:46 PM
Re: Daniel Fraser Stock removal - How is it attached.	CptCurl	20/12/12 11:54 PM
Re: Daniel Fraser Stock removal - How is it attached.	CptCurl	20/12/12 11:55 PM

Extra information

0 registered and 19 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7539

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved