Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Daniel Fraser Stock removal - How is it attached.

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

StephenCoker
.300 member

Reged: 01/12/11
Posts: 140
Loc: AR, United States of America

Re: Daniel Fraser Stock removal - How is it attached.
12/12/12 03:02 AM

This should be the way your Fraser is set up, but keep in mind that there are no absolutes.

1. You'll have to pull the hand-pin as it goes through the through-bolt.
2. Remove the buttplate/recoil pad to gain access to the through-bolt.
3. Remove throughbolt.
4. Carefully, slide the stock off.

I don't recall there is a breech pin to remove on Fraser's. Also to note, that the single shots are a bit different. On those you have to remove the safety if it is of the later design with the safety on the top strap rather than the earlier version with the safety in the trigger guard.

--------------------
www.stephencokerandco.com
Uniquely superlative rifles in the Scottish tradition.

Post Extras

Entire topic
Subject	Posted by	Posted on
Daniel Fraser Stock removal - How is it attached.	buckstix	12/12/12 02:43 AM
Re: Daniel Fraser Stock removal - How is it attached.	StephenCoker	12/12/12 03:02 AM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	12/12/12 04:25 AM
Re: Daniel Fraser Stock removal - How is it attached.	StephenCoker	12/12/12 07:49 AM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	12/12/12 08:26 AM
Re: Daniel Fraser Stock removal - How is it attached.	Claydog	12/12/12 02:02 PM
Re: Daniel Fraser Stock removal - How is it attached.	StephenCoker	13/12/12 03:20 AM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	13/12/12 05:53 AM
Re: Daniel Fraser Stock removal - How is it attached.	MikeRowe	13/12/12 01:53 PM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	13/12/12 10:24 PM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	20/12/12 02:34 PM
Re: Daniel Fraser Stock removal - How is it attached.	MikeRowe	20/12/12 02:39 PM
Re: Daniel Fraser Stock removal - How is it attached.	CptCurl	20/12/12 10:36 PM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	20/12/12 11:00 PM
Re: Daniel Fraser Stock removal - How is it attached.	AkMike	20/12/12 11:15 PM
Re: Daniel Fraser Stock removal - How is it attached.	CptCurl	20/12/12 11:50 PM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	21/12/12 12:11 AM
Re: Daniel Fraser Stock removal - How is it attached.	MikeRowe	21/12/12 04:03 AM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	21/12/12 10:38 AM
Re: Daniel Fraser Stock removal - How is it attached.	MikeRowe	21/12/12 12:40 PM
Re: Daniel Fraser Stock removal - How is it attached.	StephenCoker	23/12/12 02:58 PM
Re: Daniel Fraser Stock removal - How is it attached.	buckstix	23/12/12 08:46 PM
Re: Daniel Fraser Stock removal - How is it attached.	CptCurl	20/12/12 11:54 PM
Re: Daniel Fraser Stock removal - How is it attached.	CptCurl	20/12/12 11:55 PM

Extra information

0 registered and 15 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7542

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact