Home | Ezine | Forums | Links | Contact
NitroExpress.com: What's a bottom barrel price for a double?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

CptCurlAdministrator
.450 member


Reged: 01/05/04
Posts: 5284
Loc: Fincastle, Botetourt County, V...
Re: What's a bottom barrel price for a double?
      12/12/04 12:17 AM

4seventy,

As I said, I bought my .500 3" NE Merkel last April.

I was already in the loading business for the .500 3" because I had my .500 BPE Purdey. That rifle was bought in September, 2003. That's when I first bought HDS brass in .500 3". I bought 80 in Sept, 03 and bought another 80 in April, 04.

I have 160 rounds of the HDS brass. I have shot them all more than once. Most, if not all, have been shot in both rifles.

The Purdey's chambers and groove diameter are larger than the Merkel. It's groove diameter is .514, and the chambers accommodate the larger bullet. Rounds loaded for the Purdey won't chamber in the Merkel.

I segregate my brass into 20 round boxes and keep a record of the number of firings and in which rifle. I just checked them, and the batch that has been fired the most was fired six times in the Purdey (with larger chambers) and once in the Merkel. They show no signs of wear or fatigue at all. And I'll point out that I am full length resizing for both rifles. Thus, they get a better workout in the Purdey than in the Merkel.

There is only one quality hitch I have found with this brass. Of the 160 rounds there were three whose rims were slightly too thick to chamber in my Merkel. I have a buddy who bought a Merkel when I did. They will chamber in his rifle. My headspace is a little tighter than his. I remedied the problem by reducing the head on fine emory paper. Mind you, I know the thickness should be taken off the front of the rim, but I don't have a lathe. I didn't take off enough to remove the headstamp, nor to appreciably change the depth of the primer pocket. Primers still seat just below flush.

So in conclusion to this long-winded epistle, I am pleased with HDS brass in .500 3".

Alan, you are right about the .500 3.25" brass for .470. I don't have a .470, so have never put thought to it. If I had one, that's what I would do.

Here's a shot of one of the pieces of brass I had to doctor on (loaded for the Purdey):


Regards,
CptCurl

--------------------
RoscoeStephenson.com

YOUR DOUBLE RIFLE IS YOUR BEST FRIEND.



Edited by CptCurl (12/12/04 12:29 AM)

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* What's a bottom barrel price for a double? ATHiker07 11/12/04 03:25 AM
. * * Re: What's a bottom barrel price for a double? DUGABOY1   11/12/04 09:44 AM
. * * Re: What's a bottom barrel price for a double? new_guy   11/12/04 05:14 AM
. * * Re: What's a bottom barrel price for a double? bonanza   11/12/04 06:22 AM
. * * Re: What's a bottom barrel price for a double? CptCurlAdministrator   11/12/04 07:05 AM
. * * Re: What's a bottom barrel price for a double? 4seventy   11/12/04 10:24 AM
. * * Re: What's a bottom barrel price for a double? CptCurlAdministrator   12/12/04 12:17 AM
. * * Re: What's a bottom barrel price for a double? 470Rigby   12/12/04 08:59 AM
. * * Re: What's a bottom barrel price for a double? CptCurlAdministrator   13/12/04 11:34 AM
. * * Re: What's a bottom barrel price for a double? 470Rigby   14/12/04 06:02 AM
. * * Re: What's a bottom barrel price for a double? bonanza   14/12/04 07:15 AM
. * * Re: What's a bottom barrel price for a double? DUGABOY1   14/12/04 10:26 AM
. * * Re: What's a bottom barrel price for a double? bonanza   15/12/04 12:38 AM
. * * Re: What's a bottom barrel price for a double? DUGABOY1   15/12/04 03:24 AM
. * * Re: What's a bottom barrel price for a double? bonanza   15/12/04 05:43 AM
. * * Re: What's a bottom barrel price for a double? DUGABOY1   15/12/04 06:39 AM
. * * Re: What's a bottom barrel price for a double? bonanza   15/12/04 06:43 AM
. * * Re: What's a bottom barrel price for a double? atkinson6   29/12/04 10:40 AM
. * * Re: What's a bottom barrel price for a double? ATHiker07   13/12/04 11:25 AM
. * * Re: What's a bottom barrel price for a double? bonanza   11/12/04 04:01 AM

Extra information
0 registered and 142 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4220

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved