Home | Ezine | Forums | Links | Contact
NitroExpress.com: 9x57 information

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

DarylS
.700 member


Reged: 10/08/05
Posts: 26575
Loc: Beautiful British Columbia, Ca...
Re: 9x57 information
      30/09/12 09:33 AM

Bob - I'm not sure I'd push to 2,400fps with a 250gr. from the 57mm case. I had 2,200fps to 2,300fps in thought when I typed out my response. I'd certainly go to the 2300fps range + a bit in a M98, but as always, keeping an eye on pressures & presure signs, case appearance, extraction and lastly primers.

Do make the brass fit the respective chambers (if possible) before it's loaded for fireforming. It will last longer due to no stretching when finally formed.

I back off the FL die a bit to make sure I don't push the shoudler back when sizing. I've never had to 'bump' a shoulder as the BR boys continually must. That is due to the REALLY high pressures they generate. The fact that I only have to neck size, should show my loads are usually discrete - as least on the low sideof max, yet I do like to get what the case and action is capable of. That is why my 9.3x62 and .375/06IMP both post better ballistics than 1912 .375 H&H mag ammo. Do be careful, keeping a close eye on the progression of pressures.

We found that moderate to max. .358 Winchester data was useable in the 9.3x57 M96 Huskys. I suspect moderate or middle of the road data will also work OK in the 9x57, with same weight bullets. It gives a place to start. With moderate powders like Varget and H4895, you can start with middle of the road WW .358 data and 200 through 250gr. bullets & loads.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 9x57 information NorthernBob 29/09/12 03:54 AM
. * * Re: 9x57 information xausa   29/09/12 05:22 AM
. * * Re: 9x57 information NorthernBob   29/09/12 05:48 AM
. * * Re: 9x57 information kuduae   29/09/12 07:39 AM
. * * Re: 9x57 information NorthernBob   29/09/12 09:15 AM
. * * Re: 9x57 information GK   29/09/12 10:13 AM
. * * Re: 9x57 information DarylS   30/09/12 01:45 AM
. * * Re: 9x57 information NorthernBob   30/09/12 02:23 AM
. * * Re: 9x57 information DarylS   30/09/12 09:33 AM
. * * Re: 9x57 information NorthernBob   02/10/12 02:33 PM
. * * Re: 9x57 information DarylS   03/10/12 01:05 AM
. * * Re: 9x57 information DarylS   03/10/12 01:19 AM
. * * Re: 9x57 information GK   03/10/12 09:32 PM
. * * Re: 9x57 information DarylS   04/10/12 02:01 AM
. * * Re: 9x57 information NorthernBob   06/10/12 09:04 AM
. * * Re: 9x57 information DarylS   06/10/12 10:05 PM
. * * Re: 9x57 information NorthernBob   07/10/12 01:46 AM
. * * Re: 9x57 information DarylS   07/10/12 03:19 AM
. * * Re: 9x57 information NorthernBob   07/10/12 04:09 AM
. * * Re: 9x57 information DarylS   08/10/12 03:21 AM
. * * Re: 9x57 information NorthernBob   09/10/12 06:35 AM
. * * Re: 9x57 information DarylS   09/10/12 11:30 PM
. * * Re: 9x57 information NorthernBob   10/10/12 12:02 AM
. * * Re: 9x57 information DarylS   10/10/12 03:31 AM

Extra information
0 registered and 20 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 12866

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved