Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: What big bore to go for....

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Kiwi_bloke
.333 member

Reged: 03/09/09
Posts: 256
Loc: New Zealand

Re: What big bore to go for....
18/09/12 04:35 PM

Surely it depends on what you're after. A .416 Rigby might be too much for dik-dik. On the other hand, the largest elephant ever was shot with a .416 Rigby, so how much bigger do you really need? It's flatter shooting than many larger calibers. It can be built on a standard Mauser 98 action, but usually isn't because the receiver ring has to be partly milled away to get the bullets past it and magazine capacity will be limited.

A lot of African PH's swear by the 9,3x62 with the right bullets and, if you're confident with it, why not? One thing I have found is that, if you're presented with a situation your brain has trouble processing, such as being charged, you tend to do things automatically as you have trained to do. So if your favourite rifle has a tang safety, that's what you'll be subconsciously pushing instead of that nice 3-position safety on your new but not as yet much used custom 40 caliber. In the few seconds you have to get this error sorted, that could be important.

A .404 with modern brass would not only do the job but would have, I presume, the same (or similar) action length as the 9,3x62 and could be fitted out in the same style on a Mauser 98 receiver. If you are going to change something basic, like action length, safety, stock style etc., get plenty of practise so it's automatic, even just mounting, dry firing and re-cocking on the shoulder. But get off to the range too and try different distances, moving targets and etc. You might consider looking for a practise bullet with much the same POI as your premium ones.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
What big bore to go for....	vegard_dino	08/09/12 04:32 PM
Re: What big bore to go for....	NitroX	13/09/12 02:21 PM
Re: What big bore to go for....	Rolf	13/09/12 09:13 PM
Re: What big bore to go for....	Rolf	13/09/12 09:15 PM
Re: What big bore to go for....	hunter_angler	13/09/12 10:26 PM
Re: What big bore to go for....	Kiwi_bloke	18/09/12 04:35 PM
Re: What big bore to go for....	hunter_angler	18/09/12 10:44 PM
Re: What big bore to go for....	bigmaxx	19/09/12 02:29 AM
Re: What big bore to go for....	szihn	20/09/12 12:20 AM
Re: What big bore to go for....	DarylS	20/09/12 02:05 AM
Re: What big bore to go for....	DaggaBoyBlog	20/10/12 01:14 AM
Re: What big bore to go for....	gryphon	20/10/12 08:27 PM
Re: What big bore to go for....	grandveneur	20/10/12 09:30 PM
Re: What big bore to go for....	NitroX	09/09/12 03:19 PM
Re: What big bore to go for....	vegard_dino	10/09/12 02:32 AM
Re: What big bore to go for....	Rolf	12/09/12 08:54 PM
Re: What big bore to go for....	HendrikNZ	13/09/12 10:13 AM
Re: What big bore to go for....	DarylS	09/09/12 02:30 AM
Re: What big bore to go for....	NitroX	09/09/12 02:54 AM
Re: What big bore to go for....	Huvius	09/09/12 02:59 AM
Re: What big bore to go for....	tinker	09/09/12 02:02 PM

Extra information

0 registered and 204 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7123

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved