Home | Ezine | Forums | Links | Contact
NitroExpress.com: mainspring for an MS

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

lancaster
.470 member


Reged: 06/05/08
Posts: 9038
Loc: There's a lighthouse in the mi...
Re: mainspring for an MS
      01/09/12 03:07 PM

just got an answer

"the M 88 spring is 120 mm long with 33 turn's, inside 8,9mm. very similar is the M 1904 Vergueiro spring with 27 turn's"

confuse me a little bit because my M 88 and m 92 spring's have 27 turn's! I believe he hade just mixed up the two spring's when looking after this. I have an Vergueiro spring but it's on the bench of my gunmaker now. interesting question worth to be cleared.

five minute's later:
ok, no pic of a Vergueiro spring available, try to count them here at 2:53
http://www.youtube.com/watch?v=AkUDEKmlewg
and end with 27 turn's

dont wonder about this because this rifle is a combination of M 88 and m 98 part's + the new bolt sleeve, bolt head and a little changed firing pin.Portugal would like to have the Mannlicher Schönauer M 1903 than but it was to expensive.
so DWM was made a look alike with the things they allways had.
the M 88 spring with 33 turn's must be a later made replacement part. Turkey for example rework old M 88 rifle's after WW 1 sometime with new barrel's and complete bolt's made by the Czechs.

also available spring for the Mannlicher 92/95
http://www.historica-shop.eu/Ersatzteile...embrug-M95.html

and the Vergueiro
http://www.historica-shop.eu/Ersatzteile...tugal-1904.html

--------------------
Norwegian hunter misses moose, shoots man on toilet
.
bringing civilisation to the barbarians

Edited by lancaster (01/09/12 03:57 PM)

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* mainspring for an MS darwinmauser 31/08/12 10:11 PM
. * * Re: mainspring for an MS xausa   01/09/12 09:54 AM
. * * Re: mainspring for an MS lancaster   01/09/12 03:07 PM
. * * Re: mainspring for an MS darwinmauser   02/09/12 09:44 AM
. * * Re: mainspring for an MS lancaster   02/09/12 04:44 PM
. * * Re: mainspring for an MS brosteve   05/03/13 03:29 PM
. * * Re: mainspring for an MS lancaster   01/09/12 04:26 AM
. * * Re: mainspring for an MS lancaster   01/09/12 04:36 AM
. * * Re: mainspring for an MS lancaster   01/09/12 05:57 AM

Extra information
1 registered and 160 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 4082

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved