Home | Ezine | Forums | Links | Contact
NitroExpress.com: lead shot in stock

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

new_guy
Sponsor


Reged: 10/08/04
Posts: 581
Loc: Texas
Re: lead shot in stock
      30/11/04 07:58 AM

I don't know about the reaction between the lead and wood - i'm not a chemist, but it seems to have worked in pencils for over 100-years!

As for the cork, when i've installed my own recoil reducers - i usually pick up a walnut dowel rod of the appropriate diamater, insert it into the hole in the butstock and mark the angle at which it needs to be cut so that it's flush with the butt of the stock (under the recoil pad.)

Cut it at that marked angle, and then use a hand drill to drill a recessed hole at about 45 degrees through the dowell "plug."

Then a wood screw through the plug (with the appropriated sized pre-drilled hole) engages the wood of the stock, while the angle "tension" pulls the plug into the recoil reducer an secures it in place.

That may hold a little better than the cork.



--------------------
www.heymUSA.com

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* lead shot in stock bonanza 30/11/04 04:40 AM
. * * Re: lead shot in stock new_guy   30/11/04 05:03 AM
. * * Re: lead shot in stock bonanza   30/11/04 05:26 AM
. * * Re: lead shot in stock new_guy   30/11/04 07:58 AM

Extra information
0 registered and 163 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1421

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved