Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 1903 groove diameter

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

DarylS
.700 member

Reged: 10/08/05
Posts: 26605
Loc: Beautiful British Columbia, Ca...

Re: 1903 groove diameter
27/07/12 11:50 PM

Years ago, copper units of pressure was used and many writers interchanged the words CUP and PSI when talking about pressure.
Today, pezio measuring systems give us actual pounds per square inch - thus, the numbers sound high.

Yes - many rounds today list seemingly high numbers, but when you compare those high PSI numbers with the CUP numbers on the same loads, you see the difference.

Here's a chart, showing SAAMI pezio PSI and CIP pezio PSI numbers, as well as the SAAMI and CIP 'crusher' #'s.

Note how some are listed as maximum pressure of 65,000 under the PSI row, and 54,000 under the CUP row, or 62,000 under the PSI and 50,000 under the CUP.

Note the .22 Hornet at the top of the link's list - 46,000CUP, but 53,000PSI!

Note also how some ctgs. on a particular case, ie: .30/06 case is listed so much lower than another round on the same case, ie; the .338/06 - or 35 Whelen vs, .270 Win, or .280- all on the same case, all with different maximums. There is no obvious reasoning, except perhaps WHEN the various rounds were run through testing and when they achieved the ballistics desired, they stopped.

Note the 8mm Rem Mag - CIP max of CIP 67,000PSI! That's the highest, I think, for a factory load.

Now, if your handloads are giving you higher speeds than factory ammo, I have to wonder what your loads actually are producing for pressure?

http://kwk.us/pressures.html

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
1903 groove diameter	clatrans	21/07/12 06:05 AM
Re: 1903 groove diameter	Kiwi_bloke	21/07/12 10:42 AM
Re: 1903 groove diameter	DarylS	21/07/12 11:04 AM
Re: 1903 groove diameter	MikeRowe	21/07/12 01:05 PM
Re: 1903 groove diameter	Paul	21/07/12 05:45 PM
Re: 1903 groove diameter	DarylS	22/07/12 01:41 AM
Re: 1903 groove diameter	clatrans	24/07/12 05:28 AM
Re: 1903 groove diameter	MikeRowe	25/07/12 03:14 AM
Re: 1903 groove diameter	clatrans	25/07/12 05:22 AM
Re: 1903 groove diameter	DarylS	25/07/12 06:35 AM
Re: 1903 groove diameter	clatrans	25/07/12 07:05 AM
Re: 1903 groove diameter	DarylS	25/07/12 10:56 AM
Re: 1903 groove diameter	Paul	25/07/12 01:48 PM
Re: 1903 groove diameter	DarylS	25/07/12 11:49 PM
Re: 1903 groove diameter	Paul	27/07/12 10:16 PM
Re: 1903 groove diameter	DarylS	27/07/12 11:50 PM
Re: 1903 groove diameter	Paul	28/07/12 01:57 PM
Re: 1903 groove diameter	DarylS	29/07/12 02:08 AM
Re: 1903 groove diameter	Paul	29/07/12 11:24 AM
Re: 1903 groove diameter	clatrans	28/07/12 12:46 AM
Re: 1903 groove diameter	DarylS	28/07/12 09:32 AM
Re: 1903 groove diameter	malco	22/07/12 12:40 AM

Extra information

0 registered and 11 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 10608

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved