Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 1903 groove diameter

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

DarylS
.700 member

Reged: 10/08/05
Posts: 27000
Loc: Beautiful British Columbia, Ca...

Re: 1903 groove diameter
25/07/12 11:49 PM

The web, ie: thinning of the case where expansion to seal the chamber starts, is usally around 3/8" up the case in all cases, rimmed, belted and rimless, not just the 6.5x54. This location is easily seen by merely looking at a fired case or measuring it with a mic or calipers. A micrometer will give more accurate measurements than calipers will provide.

I allow NO expansion of the solid head of the case. I have read that up to .001" expansion is OK, however I prefer '0' expansion of that part of the case. Any expansion there, loosens the primer pocket. This 'loosness' is immediately felt when repriming the case and sometimes when poking out the old primer, depending on your method of that.

To properly measure case head expansion, one needs to mark the case prior to firing it - and measure those marks - fire the ctg. then re-measure on those marks. That is the ONLY way of discerning an accurate measurement. When a mere thousandth is the maximum allowed, calipers are NOT the tool to use. You must use a mic that is capable of measuring and being read to the 1/10,000".

I already noted that overpansion of the web area is indicative of an overly large chamber, NOT an indication of pressure.

From a post above.

"Overly large diameter expansion at the web is caused by an oversized chamber, not by excessive pressure nor excessive headspace. You must find out first, what the problem is - oversize chamber at the head, or a bonified headspace problem."

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
1903 groove diameter	clatrans	21/07/12 06:05 AM
Re: 1903 groove diameter	Kiwi_bloke	21/07/12 10:42 AM
Re: 1903 groove diameter	DarylS	21/07/12 11:04 AM
Re: 1903 groove diameter	MikeRowe	21/07/12 01:05 PM
Re: 1903 groove diameter	Paul	21/07/12 05:45 PM
Re: 1903 groove diameter	DarylS	22/07/12 01:41 AM
Re: 1903 groove diameter	clatrans	24/07/12 05:28 AM
Re: 1903 groove diameter	MikeRowe	25/07/12 03:14 AM
Re: 1903 groove diameter	clatrans	25/07/12 05:22 AM
Re: 1903 groove diameter	DarylS	25/07/12 06:35 AM
Re: 1903 groove diameter	clatrans	25/07/12 07:05 AM
Re: 1903 groove diameter	DarylS	25/07/12 10:56 AM
Re: 1903 groove diameter	Paul	25/07/12 01:48 PM
Re: 1903 groove diameter	DarylS	25/07/12 11:49 PM
Re: 1903 groove diameter	Paul	27/07/12 10:16 PM
Re: 1903 groove diameter	DarylS	27/07/12 11:50 PM
Re: 1903 groove diameter	Paul	28/07/12 01:57 PM
Re: 1903 groove diameter	DarylS	29/07/12 02:08 AM
Re: 1903 groove diameter	Paul	29/07/12 11:24 AM
Re: 1903 groove diameter	clatrans	28/07/12 12:46 AM
Re: 1903 groove diameter	DarylS	28/07/12 09:32 AM
Re: 1903 groove diameter	malco	22/07/12 12:40 AM

Extra information

1 registered and 25 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 11394

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved