Home | Ezine | Forums | Links | Contact
NitroExpress.com: 1903 groove diameter

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

MikeRowe
.333 member


Reged: 23/11/11
Posts: 478
Loc: Arkansas, USA
Re: 1903 groove diameter
      21/07/12 01:05 PM

I have had some of the Carcano bullets, and of two lots they were .2675" and .2680". So there's a little variation. However, with a .2685" groove diameter, they do fine. I have slugged Dutch Steyrs as large as .2690".

I think the original 6.5mm Dutch Mannlicher round used a .262" or .263" bullet in those oversized bores.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 1903 groove diameter clatrans 21/07/12 06:05 AM
. * * Re: 1903 groove diameter Kiwi_bloke   21/07/12 10:42 AM
. * * Re: 1903 groove diameter DarylS   21/07/12 11:04 AM
. * * Re: 1903 groove diameter MikeRowe   21/07/12 01:05 PM
. * * Re: 1903 groove diameter Paul   21/07/12 05:45 PM
. * * Re: 1903 groove diameter DarylS   22/07/12 01:41 AM
. * * Re: 1903 groove diameter clatrans   24/07/12 05:28 AM
. * * Re: 1903 groove diameter MikeRowe   25/07/12 03:14 AM
. * * Re: 1903 groove diameter clatrans   25/07/12 05:22 AM
. * * Re: 1903 groove diameter DarylS   25/07/12 06:35 AM
. * * Re: 1903 groove diameter clatrans   25/07/12 07:05 AM
. * * Re: 1903 groove diameter DarylS   25/07/12 10:56 AM
. * * Re: 1903 groove diameter Paul   25/07/12 01:48 PM
. * * Re: 1903 groove diameter DarylS   25/07/12 11:49 PM
. * * Re: 1903 groove diameter Paul   27/07/12 10:16 PM
. * * Re: 1903 groove diameter DarylS   27/07/12 11:50 PM
. * * Re: 1903 groove diameter Paul   28/07/12 01:57 PM
. * * Re: 1903 groove diameter DarylS   29/07/12 02:08 AM
. * * Re: 1903 groove diameter Paul   29/07/12 11:24 AM
. * * Re: 1903 groove diameter clatrans   28/07/12 12:46 AM
. * * Re: 1903 groove diameter DarylS   28/07/12 09:32 AM
. * * Re: 1903 groove diameter malco   22/07/12 12:40 AM

Extra information
1 registered and 29 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 11394

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved