Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 1903 groove diameter

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

DarylS
.700 member

Reged: 10/08/05
Posts: 27000
Loc: Beautiful British Columbia, Ca...

Re: 1903 groove diameter
21/07/12 11:04 AM

Just as Kiwi block indicates - All bullets, regardless of that any manual says is the overall length, must be seated to THAT bullets PROPER and REAL bullet overall length so that it isn't jammed into the lands.

In comparrison to the Hornady 160gr.RN 6.5mm bullet, the Sierra 160gr. had very long full diameter sides and must be seated VERY deeply in comparrison.

To properly handload your own ammo, you MUST know how to find the proper OAL for YOUR rifle.

Another bullet with very long straight sides (short ogive), it the .375" 300gr. Norma RN. it must be seated very deeply inside the case.

If I had a 6.5 that measured .268" groove to groove, I'd have no problem quickly deciding to use the Hornady Carcano bullet.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Entire topic
Subject	Posted by	Posted on
1903 groove diameter	clatrans	21/07/12 06:05 AM
Re: 1903 groove diameter	Kiwi_bloke	21/07/12 10:42 AM
Re: 1903 groove diameter	DarylS	21/07/12 11:04 AM
Re: 1903 groove diameter	MikeRowe	21/07/12 01:05 PM
Re: 1903 groove diameter	Paul	21/07/12 05:45 PM
Re: 1903 groove diameter	DarylS	22/07/12 01:41 AM
Re: 1903 groove diameter	clatrans	24/07/12 05:28 AM
Re: 1903 groove diameter	MikeRowe	25/07/12 03:14 AM
Re: 1903 groove diameter	clatrans	25/07/12 05:22 AM
Re: 1903 groove diameter	DarylS	25/07/12 06:35 AM
Re: 1903 groove diameter	clatrans	25/07/12 07:05 AM
Re: 1903 groove diameter	DarylS	25/07/12 10:56 AM
Re: 1903 groove diameter	Paul	25/07/12 01:48 PM
Re: 1903 groove diameter	DarylS	25/07/12 11:49 PM
Re: 1903 groove diameter	Paul	27/07/12 10:16 PM
Re: 1903 groove diameter	DarylS	27/07/12 11:50 PM
Re: 1903 groove diameter	Paul	28/07/12 01:57 PM
Re: 1903 groove diameter	DarylS	29/07/12 02:08 AM
Re: 1903 groove diameter	Paul	29/07/12 11:24 AM
Re: 1903 groove diameter	clatrans	28/07/12 12:46 AM
Re: 1903 groove diameter	DarylS	28/07/12 09:32 AM
Re: 1903 groove diameter	malco	22/07/12 12:40 AM

Extra information

1 registered and 36 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 11394

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact