Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Brno ZKK 600 9,3x62mm Project

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

TilleyMan
.333 member

Reged: 23/08/05
Posts: 272
Loc: Melbourne, Australia

Re: Brno ZKK 600 9,3x62mm Project
17/07/12 12:04 PM

Hi Daryl

That's astonishing accuracy from your .358NM!

There's a bit of a back story to my bedding decision...

I'm sure the fore-end bedding has some influence on the vertical stringing... my question is do any of your very accurate Brno ZKK's have the barrel band swivel?

I had no end of trouble bedding a ZKK601 .308 with integral barrel band sling swivel.

Orginally bedded as you recommend, with a fully floating barrel, it would change POI if carried even a short distance!

Barrel harmonics changed at the range if a sling was mounted or not.
The barrel would also visibly flex if the sling was looped over the left elbow as a brace when shooting offhand.

I never felt I could trust it completely... so it stayed in the safe.

I like a barrel mounted swivel as it enables a much lower profile when pushing through heavy tea-tree or dogwood scrub. My Sako AV 9.3x62 has a traditional stock mounted swivel which made the barrel about 5" higher so the front sight and hood were always catching on things overhead. Annoying.

So for this particular rifle, which will be carried a lot up and down some very rugged and remote hills and not fired a great deal, I'm willing to accept some vertical stringing so long as the first couple of shots out of a cold barrel are consistent.

Cheers

TM

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Brno ZKK 600 9,3x62mm Project	TilleyMan	20/10/11 12:13 AM
Re: Brno ZKK 600 9,3x62mm Project	Sville	20/10/11 02:13 AM
Re: Brno ZKK 600 9,3x62mm Project	DarylS	20/10/11 02:52 AM
Re: Brno ZKK 600 9,3x62mm Project	FATBOY404	20/10/11 07:58 AM
Re: Brno ZKK 600 9,3x62mm Project	9.3x57	20/10/11 01:04 PM
Re: Brno ZKK 600 9,3x62mm Project	kamilaroi	20/10/11 03:04 PM
Re: Brno ZKK 600 9,3x62mm Project	JDL	22/10/11 11:16 AM
Re: Brno ZKK 600 9,3x62mm Project	GK	22/10/11 06:42 PM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	22/10/11 07:40 PM
Re: Brno ZKK 600 9,3x62mm Project	GK	22/10/11 09:38 PM
Re: Brno ZKK 600 9,3x62mm Project	AdamTayler	24/11/11 01:51 PM
Re: Brno ZKK 600 9,3x62mm Project	Igorrock	12/01/12 05:34 AM
Re: Brno ZKK 600 9,3x62mm Project	FATBOY404	12/01/12 06:37 AM
Re: Brno ZKK 600 9,3x62mm Project	tophet1	12/01/12 07:34 AM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	12/01/12 07:04 PM
Re: Brno ZKK 600 9,3x62mm Project	Rule303	12/01/12 10:01 PM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	14/01/12 03:38 PM
Re: Brno ZKK 600 9,3x62mm Project	CHAPUISARMES	14/01/12 04:12 PM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	15/07/12 08:09 PM
Re: Brno ZKK 600 9,3x62mm Project	AFRO408	15/07/12 08:49 PM
Re: Brno ZKK 600 9,3x62mm Project	Ben	15/07/12 09:25 PM
Re: Brno ZKK 600 9,3x62mm Project	Rule303	15/07/12 11:51 PM
Re: Brno ZKK 600 9,3x62mm Project	DarylS	16/07/12 02:23 AM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	16/07/12 06:36 AM
Re: Brno ZKK 600 9,3x62mm Project	DarylS	17/07/12 01:26 AM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	17/07/12 12:04 PM
Re: Brno ZKK 600 9,3x62mm Project	DarylS	18/07/12 01:42 AM
Re: Brno ZKK 600 9,3x62mm Project	CHAPUISARMES	12/01/12 07:25 PM
Re: Brno ZKK 600 9,3x62mm Project	tophet1	12/01/12 08:53 PM
Re: Brno ZKK 600 9,3x62mm Project	CHAPUISARMES	22/10/11 07:39 PM
Re: Brno ZKK 600 9,3x62mm Project	Poss	22/10/11 07:26 PM

Extra information

1 registered and 16 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 54700

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved