Home | Ezine | Forums | Links | Contact
NitroExpress.com: Brno ZKK 600 9,3x62mm Project

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

TilleyMan
.333 member


Reged: 23/08/05
Posts: 272
Loc: Melbourne, Australia
Re: Brno ZKK 600 9,3x62mm Project
      16/07/12 06:36 AM

Thanks for those kind words everyone... it was nice to be able to take the time to do the job properly.
I guess I was trying to keep the feel of the old stock with a 21st Century nod towards the Mauser Oberndorf Type A

Daryl... yes, the action is bedded for about 1" around the front screw and recoil lug and under the rear tang. Front and sides were relieved with tape but the bottom was left in contact... from my experience ZKK's seem to prefer it.

Then around 1" of contact just back from the fore-end, two thin pieces of cardboard were wedged under the barrel as the Devcon set to give a small amount of preload.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Brno ZKK 600 9,3x62mm Project TilleyMan 20/10/11 12:13 AM
. * * Re: Brno ZKK 600 9,3x62mm Project Sville   20/10/11 02:13 AM
. * * Re: Brno ZKK 600 9,3x62mm Project DarylS   20/10/11 02:52 AM
. * * Re: Brno ZKK 600 9,3x62mm Project FATBOY404   20/10/11 07:58 AM
. * * Re: Brno ZKK 600 9,3x62mm Project 9.3x57   20/10/11 01:04 PM
. * * Re: Brno ZKK 600 9,3x62mm Project kamilaroi   20/10/11 03:04 PM
. * * Re: Brno ZKK 600 9,3x62mm Project JDL   22/10/11 11:16 AM
. * * Re: Brno ZKK 600 9,3x62mm Project GK   22/10/11 06:42 PM
. * * Re: Brno ZKK 600 9,3x62mm Project TilleyMan   22/10/11 07:40 PM
. * * Re: Brno ZKK 600 9,3x62mm Project GK   22/10/11 09:38 PM
. * * Re: Brno ZKK 600 9,3x62mm Project AdamTayler   24/11/11 01:51 PM
. * * Re: Brno ZKK 600 9,3x62mm Project Igorrock   12/01/12 05:34 AM
. * * Re: Brno ZKK 600 9,3x62mm Project FATBOY404   12/01/12 06:37 AM
. * * Re: Brno ZKK 600 9,3x62mm Project tophet1   12/01/12 07:34 AM
. * * Re: Brno ZKK 600 9,3x62mm Project TilleyMan   12/01/12 07:04 PM
. * * Re: Brno ZKK 600 9,3x62mm Project Rule303   12/01/12 10:01 PM
. * * Re: Brno ZKK 600 9,3x62mm Project TilleyMan   14/01/12 03:38 PM
. * * Re: Brno ZKK 600 9,3x62mm Project CHAPUISARMES   14/01/12 04:12 PM
. * * Re: Brno ZKK 600 9,3x62mm Project TilleyMan   15/07/12 08:09 PM
. * * Re: Brno ZKK 600 9,3x62mm Project AFRO408   15/07/12 08:49 PM
. * * Re: Brno ZKK 600 9,3x62mm Project Ben   15/07/12 09:25 PM
. * * Re: Brno ZKK 600 9,3x62mm Project Rule303   15/07/12 11:51 PM
. * * Re: Brno ZKK 600 9,3x62mm Project DarylS   16/07/12 02:23 AM
. * * Re: Brno ZKK 600 9,3x62mm Project TilleyMan   16/07/12 06:36 AM
. * * Re: Brno ZKK 600 9,3x62mm Project DarylS   17/07/12 01:26 AM
. * * Re: Brno ZKK 600 9,3x62mm Project TilleyMan   17/07/12 12:04 PM
. * * Re: Brno ZKK 600 9,3x62mm Project DarylS   18/07/12 01:42 AM
. * * Re: Brno ZKK 600 9,3x62mm Project CHAPUISARMES   12/01/12 07:25 PM
. * * Re: Brno ZKK 600 9,3x62mm Project tophet1   12/01/12 08:53 PM
. * * Re: Brno ZKK 600 9,3x62mm Project CHAPUISARMES   22/10/11 07:39 PM
. * * Re: Brno ZKK 600 9,3x62mm Project Poss   22/10/11 07:26 PM

Extra information
1 registered and 241 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 55893

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved