Home | Ezine | Forums | Links | Contact
NitroExpress.com: My M-S 1903 Take Down .256

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

Kiwi_bloke
.333 member


Reged: 03/09/09
Posts: 256
Loc: New Zealand
Re: My M-S 1903 Take Down .256
      10/07/12 07:03 PM

That's a really nice M.1903.

My 1927 M.1910 in 9,5x57 M.Sch has the same arrangement of a removable horn pistol grip cap with the same sight wrapped in newspaper. It's 10 thou different to the fitted sight and there's at least 1.5" change in group height by changing sights. To remove the fitted sight on my rifle, I have to drift it from left to right.

Mine doesn't have the multi-leaf standing sights like yours but an early factory catalogue shows they were an optional extra, perhaps fitted in this case for Heyer. In other respects, including the take-down pin and lever, it's the same and it was known by the Steyr factory as their "English" model. As to my barrel length, it's either the same or similar, I'd have to check. The M.1910 has a steel buttplate rather than a pad and this has a couple of spare rounds and a cleaning rod (take-down), under a trap. It also has a Baillie-Grohman peep sight that folds down when the bolt is cocked and then back up again.

I also have a 6,5 M.Sch carbine. I find that new or old 159-grain RWS bullets are undersize. Perhaps to fit some other German 6,5mm caliber also? I use an expander ball that I've turned down a few thou and this grips these undersize bullets, but accuracy is not flash and velocity is lacking. Hornady 160 grain .264" bullets are much more accurate and velocity better. If you slug the bore, you may be able to use Carcano diameter bullets as Handloader magazine recently advised. However, the Carcano bullets have to be loaded to a much shorter length or otherwise they jam in the rifling. This is because the forward part of the bullet is much less tapered than the .264" ones from the same company. Unless you have an OAL guage, and are a very experienced handloader, I'd perhaps avoid them. However, they do give good accuracy and velocity by obturating those rifles fitted with oversize bores. It seems that before 1945 6,5x54 M.Sch barrel lands and grooves were somewhat larger than those made after 1950, but assume nothing until your bore has been slugged.

I was in the Holland and Holland gunroom 25 or more years ago and this new Scottish law was about to come into effect. I was looking at a couple of 6,5x54 Mannlicher's but they expected others would soon become available. They made the point, a very fair one I think, that the 6,5 Mannlicher had probably shot more red deer in Scottland than any other except perhaps the venerable .303 British. It had also accounted for probably every game animal on Earth. So it is a very silly law.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* My M-S 1903 Take Down .256 Clark 27/06/12 04:35 AM
. * * Re: My M-S 1903 Take Down .256 dons   27/06/12 05:04 AM
. * * Re: My M-S 1903 Take Down .256 Clark   27/06/12 05:10 AM
. * * Re: My M-S 1903 Take Down .256 lancaster   27/06/12 01:11 PM
. * * Re: My M-S 1903 Take Down .256 500Nitro   27/06/12 01:21 PM
. * * Re: My M-S 1903 Take Down .256 HeymSR20   10/07/12 03:10 AM
. * * Re: My M-S 1903 Take Down .256 Clark   10/07/12 09:20 PM
. * * Re: My M-S 1903 Take Down .256 NitroXAdministrator   11/07/12 02:30 PM
. * * Re: My M-S 1903 Take Down .256 Rule303   12/07/12 08:50 AM
. * * Re: My M-S 1903 Take Down .256 Kiwi_bloke   10/07/12 07:03 PM
. * * Re: My M-S 1903 Take Down .256 NitroXAdministrator   12/07/12 06:05 PM
. * * Re: My M-S 1903 Take Down .256 Kiwi_bloke   12/07/12 06:38 PM
. * * Re: My M-S 1903 Take Down .256 Clark   13/07/12 06:09 AM
. * * Re: My M-S 1903 Take Down .256 Kiwi_bloke   13/07/12 04:45 PM
. * * Re: My M-S 1903 Take Down .256 Clark   13/07/12 05:45 PM
. * * Re: My M-S 1903 Take Down .256 HeymSR20   14/07/12 04:08 AM
. * * Re: My M-S 1903 Take Down .256 JDL   14/07/12 10:32 AM
. * * Re: My M-S 1903 Take Down .256 Clark   14/07/12 05:24 PM
. * * Re: My M-S 1903 Take Down .256 JDL   14/07/12 11:40 PM
. * * Re: My M-S 1903 Take Down .256 NitroXAdministrator   15/07/12 12:32 AM
. * * Re: My M-S 1903 Take Down .256 Kiwi_bloke   16/07/12 08:23 AM
. * * Re: My M-S 1903 Take Down .256 HeymSR20   17/07/12 07:41 PM
. * * Re: My M-S 1903 Take Down .256 DarylS   18/07/12 02:02 AM
. * * Re: My M-S 1903 Take Down .256 HeymSR20   18/07/12 08:55 PM
. * * Re: My M-S 1903 Take Down .256 FATBOY404   18/07/12 08:57 PM
. * * Re: My M-S 1903 Take Down .256 DarylS   19/07/12 12:29 AM
. * * Re: My M-S 1903 Take Down .256 Clark   22/02/13 02:38 AM
. * * Re: My M-S 1903 Take Down .256 casper50   22/02/13 03:33 AM
. * * Re: My M-S 1903 Take Down .256 Clark   22/02/13 05:08 AM
. * * Re: My M-S 1903 Take Down .256 casper50   22/02/13 05:56 AM
. * * Re: My M-S 1903 Take Down .256 Caprivi   22/02/13 06:10 AM
. * * Re: My M-S 1903 Take Down .256 Clark   22/02/13 08:54 AM
. * * Re: My M-S 1903 Take Down .256 Kiwi_bloke   10/07/12 07:10 PM
. * * Re: My M-S 1903 Take Down .256 Clark   10/07/12 09:18 PM

Extra information
0 registered and 21 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 27449

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved