Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 3006 or 45/70

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

TomN
.300 member

Reged: 07/03/10
Posts: 149
Loc: washington

Re: 3006 or 45/70
01/07/12 10:39 AM

I have posted this on the reloading form but haven't gotten a replay as yet. I have gotten all the things I need to reloade for the 45/70 I have hornady 350gr. interlocks and some Speer 400 gr. flat points. The Hodgdon manual lists the 350's at 1786 FPS at 21800 CUP and 2013 at 29500. The speers are listed at 1845 at 25000 CUP. The rifle barrel is marked max pressure 2200 bar whith I think is 31900 psi (14.5 per 1 bar x 2200) would that be right? If it is I would have a hard time deciding whith one to use. the RP 405's shoot very well but are a little on the slow side for what I want I doin't know if the others are to hot but the manual lists 385 cast at 1805 for 21800 in the trapdoor so the 21800 in the 350 should be ok I just doint know abut the 2013 load. I have herd that in the 45/70 and some others cup and psi are the same is that right? thanks
Tom N

Post Extras

Entire topic
Subject	Posted by	Posted on
3006 or 45/70	TomN	04/04/12 11:32 AM
Re: 3006 or 45/70	FATBOY404	04/04/12 01:12 PM
Re: 3006 or 45/70	guns68	04/04/12 01:46 PM
Re: 3006 or 45/70	tinker	04/04/12 02:29 PM
Re: 3006 or 45/70	mauserand9mm	04/04/12 05:11 PM
Re: 3006 or 45/70	guns68	05/04/12 07:03 AM
Re: 3006 or 45/70	AkMike	05/04/12 08:32 AM
Re: 3006 or 45/70	guns68	06/04/12 12:07 PM
Re: 3006 or 45/70	AkMike	06/04/12 12:59 PM
Re: 3006 or 45/70	ruffcountry	06/04/12 02:56 PM
Re: 3006 or 45/70	TomN	05/04/12 01:50 PM
Re: 3006 or 45/70	mauserand9mm	05/04/12 02:41 PM
Re: 3006 or 45/70	TomN	06/04/12 11:50 AM
Re: 3006 or 45/70	mauserand9mm	06/04/12 07:19 PM
Re: 3006 or 45/70	TomN	07/04/12 11:24 AM
Re: 3006 or 45/70	kamilaroi	08/04/12 03:52 PM
Re: 3006 or 45/70	gallatin	10/04/12 03:37 PM
Re: 3006 or 45/70	DarylS	11/04/12 12:35 AM
Re: 3006 or 45/70	TomN	11/04/12 10:44 AM
Re: 3006 or 45/70	AkMike	11/04/12 11:11 AM
Re: 3006 or 45/70	TomN	20/04/12 10:45 AM
Re: 3006 or 45/70	TomN	13/05/12 03:27 AM
Re: 3006 or 45/70	AkMike	13/05/12 01:42 PM
Re: 3006 or 45/70	TomN	14/05/12 01:11 AM
Re: 3006 or 45/70	AkMike	14/05/12 03:02 AM
Re: 3006 or 45/70	Fjold	14/05/12 09:44 AM
Re: 3006 or 45/70	TomN	14/05/12 01:16 PM
Re: 3006 or 45/70	TomN	18/05/12 01:22 PM
Re: 3006 or 45/70	TomN	26/05/12 06:01 AM
Re: 3006 or 45/70	DarylS	26/05/12 07:25 AM
Re: 3006 or 45/70	TomN	26/05/12 10:38 AM
Re: 3006 or 45/70	AkMike	26/05/12 11:46 AM
Re: 3006 or 45/70	TomN	27/05/12 02:22 AM
Re: 3006 or 45/70	Fjold	27/05/12 12:58 PM
Re: 3006 or 45/70	bwananelson	27/05/12 02:28 PM
Re: 3006 or 45/70	NitroX	27/05/12 07:53 PM
Re: 3006 or 45/70	TomN	28/05/12 12:36 AM
Re: 3006 or 45/70	Fjold	28/05/12 04:03 AM
Re: 3006 or 45/70	TomN	04/06/12 08:48 AM
Re: 3006 or 45/70	DarylS	04/06/12 10:21 AM
Re: 3006 or 45/70	Bill_Cooley	04/06/12 12:36 PM
Re: 3006 or 45/70	TomN	04/06/12 01:23 PM
Re: 3006 or 45/70	TomN	01/07/12 10:39 AM
(was 3006 or 45/70 remSxS) ->-> C.U.P. VS P.S.I. Handloads	tinker	01/07/12 01:43 PM
Re: (was 3006 or 45/70 remSxS) ->-> C.U.P. VS P.S.I. Handloads	DarylS	02/07/12 06:43 AM
Re: (was 3006 or 45/70 remSxS) ->-> C.U.P. VS P.S.I. Handloads	ruffcountry	02/07/12 02:01 PM
Re: (was 3006 or 45/70 remSxS) ->-> C.U.P. VS P.S.I. Handloads	DarylS	03/07/12 02:47 AM
Re: (was 3006 or 45/70 remSxS) ->-> C.U.P. VS P.S.I. Handloads	TomN	03/07/12 12:43 PM
Re: 3006 or 45/70	TomN	13/05/12 03:22 AM
Re: 3006 or 45/70	DarylS	20/04/12 12:53 PM
Re: 3006 or 45/70	TomN	20/04/12 01:49 PM
Re: 3006 or 45/70	DarylS	21/04/12 01:11 AM
Re: 3006 or 45/70	AkMike	20/04/12 11:37 AM
Re: 3006 or 45/70	pricedo	16/09/12 01:49 PM
Re: 3006 or 45/70	Michael	18/09/12 12:16 AM
Re: 3006 or 45/70	pricedo	18/09/12 02:41 AM
Re: 3006 or 45/70	DarylS	18/09/12 03:19 AM
Re: 3006 or 45/70	tinker	18/09/12 03:35 AM
Re: 3006 or 45/70	DarylS	17/09/12 01:53 AM
Re: 3006 or 45/70	TomN	08/04/12 05:50 AM
Re: 3006 or 45/70	AkMike	08/04/12 06:25 AM
Re: 3006 or 45/70	TomN	08/04/12 09:42 AM
Re: 3006 or 45/70	DarylS	05/04/12 01:38 AM

Extra information

0 registered and 76 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 28272

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact