Home | Ezine | Forums | Links | Contact
NitroExpress.com: 9,3x70 DWM

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

Bison
.224 member


Reged: 19/05/11
Posts: 8
Loc: Wyoming
Re: 9,3x70 DWM
      20/05/12 01:47 AM


Hello Igorrock;

Glad you asked. Not really...I'll fill you in on the 9.3x64 Newton now:

The case does look similar to the 9.3x64 Brenneke. But the 9.3x64 Newton case has more volume, I have a 9.3x64 Brenneke case & its case volume I carefully measured of this RWS case as 84.0 gr. water. The 9.3 Newton has 89 gr. water. However, the larger volume & more powder at the top end loading makes a good difference in velocity.

Here's how I made the 9.3x64 Newton. Its simply a .35 Newton case necked up to 9.3 caliber. The Newton cases are very good, a modern type case design with a big body, yet standard size length (.30-06 length).
However, even though .35 Newton cases are being made...they are too expensive! A better way is to just buy .375 Ruger brass, shorten the brass to 2.5 inches long & size it in the 9.3x64 Newton die.
You can also buy .375 Ruger "basic" brass that has no caliber headstamp, have it headstamped 9.3x 64 Newton, then size it.
Now...I have a .35 Newton chamber reamer...so my gunsmith used that on a 9.3 barrel, then a 9.3 neck reamer to make it the 9.3. I fired 3 cartridges, send the fired cartridges to Hornady and they made the custom 9.3x64 Newton dies for it. Since then, all I do is use .375 Ruger brass, shortened & sized
in the custom dies.
I corresponded with Harold Wolf as he made a 9.3x70 mag. rifle, and giving him my 9.3x64 Newton
ballistics, he said it was more than what he got from his 9.3x70 mag. and warned me about too high
pressures...but my pressure is OK.
If you put the 9.3x64 Brenneke next to the 9.3x64 Newton, you will notice that the Newton case has
a larger base, and shoulder diameter, and the shoulder angle on both cases look the same. The Newton
case neck is very slightly longer...but not much. Case lengths about the same. Its a better looking
case than the 9.3x64 Brenneke.I'm not sure if you know of Charles Newton, but he was the greatest
American case designer. I made the 9.3x64 Newton, a .416 Newton & a .450 (.458) Newton based on the
same parent Newton case...and they are all superior cartridges.
Best Regards,
Tom from Wyoming

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* 9,3x70 DWM Igorrock 29/10/10 01:57 AM
. * * Re: 9,3x70 DWM CZ_hunter   31/08/13 03:22 AM
. * * Re: 9,3x70 DWM Yochanan   31/08/13 03:29 AM
. * * Re: 9,3x70 DWM Igorrock   07/10/13 03:35 AM
. * * Re: 9,3x70 DWM Ash   09/11/13 09:00 PM
. * * Re: 9,3x70 DWM Wanabebwana   25/05/15 07:11 AM
. * * Re: 9,3x70 DWM GPJ12345   05/06/15 01:19 AM
. * * Re: 9,3x70 DWM 333_okh   10/04/15 03:35 PM
. * * Re: 9,3x70 DWM 333_okh   03/05/15 04:10 PM
. * * Re: 9,3x70 DWM rigbymauser   03/05/15 05:39 PM
. * * Re: 9,3x70 DWM 333_okh   04/05/15 07:59 AM
. * * Re: 9,3x70 DWM Yochanan   30/10/10 06:02 AM
. * * Re: 9,3x70 DWM DarylS   30/10/10 06:37 AM
. * * Re: 9,3x70 DWM Yochanan   30/10/10 07:00 AM
. * * Re: 9,3x70 DWM Rolf   02/11/10 11:00 PM
. * * Re: 9,3x70 DWM kuduae   05/11/10 11:23 AM
. * * Re: 9,3x70 DWM reddy375   14/09/11 12:42 PM
. * * Re: 9,3x70 DWM Bison   18/05/12 08:37 AM
. * * Re: 9,3x70 DWM Igorrock   18/05/12 05:19 PM
. * * Re: 9,3x70 DWM Bison   19/05/12 04:25 AM
. * * Re: 9,3x70 DWM Igorrock   19/05/12 06:09 AM
. * * Re: 9,3x70 DWM Bison   20/05/12 01:47 AM
. * * Re: 9,3x70 DWM Bison   20/05/12 01:57 AM
. * * Re: 9,3x70 DWM Igorrock   20/05/12 02:41 AM
. * * Re: 9,3x70 DWM Bison   20/05/12 03:12 AM
. * * Re: 9,3x70 DWM Igorrock   20/05/12 04:38 AM
. * * Re: 9,3x70 DWM Bison   20/05/12 08:01 AM
. * * Re: 9,3x70 DWM rigbymauser   15/09/11 04:30 AM
. * * Re: 9,3x70 DWM HuntingSchneider   30/10/10 03:32 AM
. * * Re: 9,3x70 DWM Igorrock   30/10/10 05:32 AM
. * * Re: 9,3x70 DWM rigbymauser   30/10/10 01:53 AM

Extra information
0 registered and 180 anonymous users are browsing this forum.

Moderator:   



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 37365

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved