Home | Ezine | Forums | Links | Contact
NitroExpress.com: Regulating a 12 bore

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

Smoke73
.300 member


Reged: 30/05/11
Posts: 164
Loc: Rocky Mtn. House Alberta
Re: Regulating a 12 bore
      25/03/12 05:21 AM

Some interesting info on Husqvarna Shotguns. Sweden never had proofing laws because they believed in the product of choice Husqvarna.

From research about the Husqvarna shotguns test program the following conclusion can be drawn:
Guns marked on the barrel "Special Steel" or “Niklstal” are intended for smokeless powder. This information came from the Husqvarna museum.
The proof mark on Husqvarna shotguns can be a small or large letter H with a crown. From this it cannot be concluded whether the weapon was proof-fired for nitro- or for black powder, only that the gun WAS proof-fired. Research into this marking continues.
Some facts:
Generally, the guns were fitted with steel barrels, but damascus barrels were delivered on demand as late as 1908.
Translation of the test program and quality control from the 1902 catalogue.
"When a barrel bursts, or the gun, for some other reason is damaged during shooting, the gun manufacturer, in most cases, gets the blame with the argument that the reason for the damage is use of bad quality materials, or manufacturing flaw. That such faults should exist on guns delivered from us, we consider that we have prevented, partly by using only best quality materials, and partly, and above all, by the most accurate inspections, and rigorous tests. I.e. the barrels on guns delivered from us have passed two firing tests. The first test, made when the barrel has been pretreated, is carried out with tripled black powder charge, and fivefold shot load. The second test, made when the gun is ready for delivery, is carried out with double powder charge and double shot load. If the barrels and the action has passed there tests, without in any way having been altered, they will not be damaged when using normal powder charges and shot loads, independent of the charge being black powder or suitable low smoke powder. Additionally, from each new set of barrel raw material, samples for test firing are taken. This test firing takes place in such a way that the barrel, drilled to cal. 16, and the outer diameter turned to a diameter that correspond to that of a typical 16 cal. gun, is charged with 14,25 grams of black powder and, initially, at the first shot, loaded with 85 grams of shots. The shot load i increased in such a way that, at the 24th firing, the shot load is 456 grams. For the 25th firing, the charge is increased to 19 grams. Firing continues, for each three firings, the charge is increased, for each firing the shot load is increased, until the barrel bursts. Generally, our barrels, made of Swedish steel, will hold a charge of 14.25 grams of powder, and a shot load of 400 grams. Barrels made of special steel will hold a charge of 23,75 grams of powder and 860 grams of shot load."


Top Lever shotguns
As concluded before, Husqvarna shotguns made after 1908 are designed for smokeless powder. The serial number at the end of 1908 was 55000.

--------------------
Your not tired, you just think your tired, you don't even know what the hell tired is.- Garth Ahlstrom (Thanx Dad love ya)

"When one of them is born, their god says ' Go in peace.'
When one of us is born our Gods say "Go hunting."- J. Emmett Willie

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Regulating a 12 bore Smoke73 28/07/11 05:41 AM
. * * Re: Regulating a 12 bore DennisA   05/08/11 09:07 AM
. * * Re: Regulating a 12 bore DarylS   06/08/11 02:47 AM
. * * Re: Regulating a 12 bore DennisA   06/08/11 03:17 AM
. * * Re: Regulating a 12 bore DarylS   06/08/11 08:17 AM
. * * Re: Regulating a 12 bore DennisA   06/08/11 04:50 PM
. * * Re: Regulating a 12 bore Smoke73   06/08/11 05:12 PM
. * * Re: Regulating a 12 bore DennisA   07/08/11 03:23 AM
. * * Re: Regulating a 12 bore DennisA   07/08/11 03:26 AM
. * * Re: Regulating a 12 bore DarylS   07/08/11 04:03 AM
. * * Re: Regulating a 12 bore Smoke73   07/08/11 04:52 PM
. * * Re: Regulating a 12 bore Smoke73   11/09/11 11:43 AM
. * * Re: Regulating a 12 bore DarylS   12/09/11 01:59 AM
. * * Re: Regulating a 12 bore Smoke73   14/09/11 12:31 PM
. * * Re: Regulating a 12 bore Smoke73   14/09/11 12:37 PM
. * * Re: Regulating a 12 bore DarylS   15/09/11 01:02 AM
. * * Re: Regulating a 12 bore Smoke73   16/09/11 01:20 PM
. * * Re: Regulating a 12 bore jaz   16/09/11 09:09 PM
. * * Re: Regulating a 12 bore DarylS   17/09/11 12:46 AM
. * * Re: Regulating a 12 bore Smoke73   29/09/11 03:13 PM
. * * Re: Regulating a 12 bore DarylS   30/09/11 01:25 AM
. * * Re: Regulating a 12 bore Smoke73   17/11/11 07:26 PM
. * * Re: Regulating a 12 bore DarylS   18/11/11 04:37 AM
. * * Re: Regulating a 12 bore Smoke73   18/11/11 07:12 AM
. * * Re: Regulating a 12 bore DarylS   18/11/11 07:38 AM
. * * Re: Regulating a 12 bore Smoke73   05/01/12 04:17 PM
. * * Re: Regulating a 12 bore Smoke73   05/01/12 05:07 PM
. * * Re: Regulating a 12 bore Smoke73   14/01/12 11:59 AM
. * * Re: Regulating a 12 bore DarylS   15/01/12 05:51 AM
. * * Re: Regulating a 12 bore Smoke73   15/01/12 04:46 PM
. * * Re: Regulating a 12 bore DarylS   16/01/12 06:01 AM
. * * Re: Regulating a 12 bore Smoke73   16/01/12 06:18 AM
. * * Re: Regulating a 12 bore Smoke73   16/01/12 06:34 AM
. * * Re: Regulating a 12 bore Smoke73   23/01/12 05:44 PM
. * * Re: Regulating a 12 bore DarylS   24/01/12 04:14 AM
. * * Re: Regulating a 12 bore DarylS   24/01/12 04:21 AM
. * * Re: Regulating a 12 bore Smoke73   07/02/12 08:19 AM
. * * Re: Regulating a 12 bore DarylS   08/02/12 06:18 AM
. * * Re: Regulating a 12 bore Smoke73   08/02/12 09:46 AM
. * * Re: Regulating a 12 bore tinkerModerator   08/02/12 12:57 PM
. * * Re: Regulating a 12 bore DarylS   09/02/12 03:33 AM
. * * Re: Regulating a 12 bore tinkerModerator   09/02/12 04:07 AM
. * * Re: Regulating a 12 bore Smoke73   22/03/12 03:52 PM
. * * Re: Regulating a 12 bore tinkerModerator   22/03/12 04:50 PM
. * * Re: Regulating a 12 bore Smoke73   23/03/12 01:42 AM
. * * Re: Regulating a 12 bore Smoke73   23/03/12 03:55 PM
. * * Re: Regulating a 12 bore tinkerModerator   23/03/12 04:15 PM
. * * Re: Regulating a 12 bore Smoke73   23/03/12 11:38 PM
. * * Re: Regulating a 12 bore Smoke73   25/03/12 05:21 AM
. * * Re: Regulating a 12 bore Smoke73   25/03/12 01:28 PM
. * * Re: Regulating a 12 bore Smoke73   25/03/12 01:30 PM
. * * Re: Regulating a 12 bore beleg2   28/07/11 09:51 PM
. * * Re: Regulating a 12 bore Smoke73   28/07/11 11:11 PM
. * * Re: Regulating a 12 bore CommandCar   29/07/11 01:02 AM
. * * Re: Regulating a 12 bore DarylS   29/07/11 01:46 AM
. * * Re: Regulating a 12 bore DarylS   29/07/11 02:02 AM
. * * Re: Regulating a 12 bore Smoke73   29/07/11 05:34 AM
. * * Re: Regulating a 12 bore CommandCar   29/07/11 12:31 PM
. * * Re: Regulating a 12 bore Smoke73   29/07/11 04:24 PM
. * * Re: Regulating a 12 bore DarylS   30/07/11 01:34 AM
. * * Re: Regulating a 12 bore Smoke73   30/07/11 11:31 AM
. * * Re: Regulating a 12 bore Smoke73   29/07/11 01:35 AM
. * * Re: Regulating a 12 bore 500Nitro   29/07/11 01:41 AM

Extra information
0 registered and 71 anonymous users are browsing this forum.

Moderator:  tinker 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 19063

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved