Home | Ezine | Forums | Links | Contact
NitroExpress.com: Charring

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Muzzleloaders & Blackpowder

DarylSModerator
.700 member


Reged: 10/08/05
Posts: 27707
Loc: Beautiful British Columbia, Ca...
Re: Charring
      22/01/12 12:13 PM

I have not had the problem with either flint nor caplocks that I have. Sorry, cannot suggest anything. My caplocks have patent breeches which protects the wood and the pan, fence and frizzen do that on the flinters.

Perhaps it is a gap problem as Coin notes.
The flinters get a big of fouling on the wood ahead of the lock, but it is not burning the wood.

Poor leaking threads I suppose or holes bored by Pyrodex phony powder fouling can cause burning the wood. I've seen that happen on 2 guns so far, a custom rifle and a TC, where the breech plug was actually perforated, ie: achannel eaten through to the outside. The custom rifle's hole went out the bottom of the breech block, which pressure-burnt a groove and hole into the stock beneath the barrel in just a few shotws. The owner was lucky he spotted it and the gun could be repaired.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Charring Tatume 22/01/12 12:21 AM
. * * Re: Charring tinker   22/01/12 02:15 AM
. * * Re: Charring Tatume   22/01/12 05:11 AM
. * * Re: Charring CowboyCS   22/01/12 02:39 AM
. * * Re: Charring Tatume   22/01/12 05:12 AM
. * * Re: Charring DarylSModerator   22/01/12 12:13 PM

Extra information
0 registered and 3 anonymous users are browsing this forum.

Moderator:  DarylS 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3680

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved