Home | Ezine | Forums | Links | Contact
NitroExpress.com: Some Info on ball mould size in 12 & 8 Bore ?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

DarylS
.700 member


Reged: 10/08/05
Posts: 26414
Loc: Beautiful British Columbia, Ca...
Re: Some Info on ball mould size in 12 & 8 Bore ?
      21/12/11 05:29 AM

After re-reading much of this, I'm positive that Command Car's suggestion is spot on - slowing them down might being them together, perfectly. Reduction in charge is replaced with light weight wadding to maintain the slightly compressed load, so the powder burns correctly.

At the original gun was a BP gun and it would have been regulated that way, slowing it down to around 1,800fps should bring the barrels together. I think you might even have the corect ball size. I'd play with those a bit more, first, as you are so close to a correct solution.
Buying expensive moulds at this time, would not be the best use of your spare change. Real BP and lead would be. HA!

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Some Info on ball mould size in 12 & 8 Bore ? Sarg 13/12/11 10:58 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? gatsby   17/12/11 03:44 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? gatsby   17/12/11 03:40 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? CommandCar   17/12/11 02:06 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? Sarg   17/12/11 11:54 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? CommandCar   18/12/11 03:31 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? Sarg   18/12/11 07:13 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? tinkerModerator   19/12/11 01:49 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? Sarg   19/12/11 05:44 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? CommandCar   21/12/11 04:53 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? DarylS   21/12/11 05:03 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? DarylS   21/12/11 05:29 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? Sarg   21/12/11 12:11 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? CommandCar   21/12/11 12:57 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? rigbymauser   17/06/12 06:06 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? CommandCar   21/06/12 08:19 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? rigbymauser   22/06/12 06:25 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? DarylS   22/06/12 01:24 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? DarylS   18/06/12 02:08 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? tinkerModerator   18/06/12 02:05 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? CommandCar   20/12/11 02:23 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? tinkerModerator   20/12/11 02:51 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? gatsby   19/12/11 01:58 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? DarylS   19/12/11 03:53 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? gatsby   18/12/11 04:08 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? CommandCar   18/12/11 04:50 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? Sarg   18/12/11 12:32 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? gatsby   18/12/11 01:34 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? DarylS   18/12/11 04:58 AM

Extra information
0 registered and 8 anonymous users are browsing this forum.

Moderator:  tinker 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 12786

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved