Home | Ezine | Forums | Links | Contact
NitroExpress.com: Some Info on ball mould size in 12 & 8 Bore ?

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

gatsby
.375 member


Reged: 05/09/05
Posts: 862
Loc: inland valley CA USA
Re: Some Info on ball mould size in 12 & 8 Bore ?
      18/12/11 04:08 PM

Quote:

Quote:

Well I've posted all the details on the 12 Bore before , but to summarize the 12 bore is a top lever hammerless by Tolley 1896 , 3in most likely a 9Dram rifle , but no load data on the rifle , 1 in 80in twist , 24in barrels , 100 yard standing sight folding to 300 , almost 15lbs & semi visible rifling , actually the rifling is more than that it is rounded with sharp lands !




Is the twist 1 in 100 or 1 in 80 as above? There are no absolutes, but at almost 15 lbs and a twist faster than 1 in 100 or 120, we are leaning to the conical end of the spectrum according to my research. These guns were built to a weight to handle a given recoil level. 15 lbs is on the high side, so I would expect it was made for heavier slugs. For example, a 12 bore rifle with a 1 in 60" twist weighing 15 lbs would be a conical configuration.

Nice groups, since your sights start at 100 yards, I would conduct most of my testing at that distance. 50 yards should be childs play once you have the right combination, but if you find an average or even poor combination that works at 50, 100 yards will often disapoint. I, personally, do not like to be teased...




I will try and verify the twist rate in my Holland 12b rifle but as far as muzzle loading goes 1/32 is a conical twist and 1/72 for round ball. I think I have that right maybe Darrel can shed some light on the subject.

--------------------
"Recoil is insignificant when there is a tiger on the head of your elephant" The Maharaja of Cooch Behar



Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Some Info on ball mould size in 12 & 8 Bore ? Sarg 13/12/11 10:58 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? gatsby   17/12/11 03:44 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? gatsby   17/12/11 03:40 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? CommandCar   17/12/11 02:06 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? Sarg   17/12/11 11:54 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? CommandCar   18/12/11 03:31 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? Sarg   18/12/11 07:13 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? tinkerModerator   19/12/11 01:49 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? Sarg   19/12/11 05:44 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? CommandCar   21/12/11 04:53 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? DarylS   21/12/11 05:03 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? DarylS   21/12/11 05:29 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? Sarg   21/12/11 12:11 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? CommandCar   21/12/11 12:57 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? rigbymauser   17/06/12 06:06 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? CommandCar   21/06/12 08:19 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? rigbymauser   22/06/12 06:25 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? DarylS   22/06/12 01:24 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? DarylS   18/06/12 02:08 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? tinkerModerator   18/06/12 02:05 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? CommandCar   20/12/11 02:23 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? tinkerModerator   20/12/11 02:51 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? gatsby   19/12/11 01:58 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? DarylS   19/12/11 03:53 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? gatsby   18/12/11 04:08 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? CommandCar   18/12/11 04:50 AM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? Sarg   18/12/11 12:32 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? gatsby   18/12/11 01:34 PM
. * * Re: Some Info on ball mould size in 12 & 8 Bore ? DarylS   18/12/11 04:58 AM

Extra information
0 registered and 17 anonymous users are browsing this forum.

Moderator:  tinker 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 12888

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved