Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 25-06 into 9.3x62

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

AFRO408
.333 member

Reged: 21/01/09
Posts: 312
Loc: Arding NSW

Re: 25-06 into 9.3x62
02/11/11 08:56 AM

Here you go mate.

http://www.youtube.com/watch?v=QzxMuM3kOqA&feature=feedu

http://www.youtube.com/watch?v=RrSa4jTvYIQ&feature=feedu

http://www.youtube.com/watch?v=RrSa4jTvYIQ&feature=feedu

http://www.youtube.com/watch?v=_JTUMWdNM2U&feature=feedu

Setting up the barrel shank to cut the extractor relief.

Cutting the relief.

The barrel fits nicely.

I first 'tin' the matching surfaces and clean all traces of the acid flux from the pieces.

The sight bases and sling swivel are soldered on nice and level using 6% Silver solder and resin flux.
I then clean all the excess solder off with a soft chisel, diamond hone and emery cloth lubed with Kerosene.

Barrel in the white, ready for sight regulation and bluing.

The original bedding was good, but needed relieving behind the square lug below the rear tang. This is a common problem that I encounter and on a large cal rifle, contact here will result in splitting the wrist of the stock, or removing a complete wedge of wood.

A mortice was cut for the secondary recoil lug and some wood from the side of the channel for the sight base.

Front Night sight was fitted and some metal needed to be removed from the bottom of the dovetail, to allow the flip up night sight to work smoothly.

Rear sight leaf was fitted and will be regulated to 50m
The rear of the sight bases was stippled as well.

The bolt release lever knob was built up with weld, shaped and knurled.

Talley cross bolt was fitted behind the recoil lug and then it and the bolt release were Nitre blued.

Edited by AFRO408 (02/11/11 09:00 PM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
25-06 into 9.3x62	MarkR	01/11/11 07:40 PM
Re: 25-06 into 9.3x62	MarkR	01/11/11 08:56 PM
Re: 25-06 into 9.3x62	MarkR	01/11/11 09:54 PM
Re: 25-06 into 9.3x62	AFRO408	02/11/11 08:56 AM
Re: 25-06 into 9.3x62	MarkR	02/11/11 01:19 PM
Re: 25-06 into 9.3x62	AFRO408	02/11/11 02:40 PM
Re: 25-06 into 9.3x62	ozhunter	02/11/11 05:59 PM
Re: 25-06 into 9.3x62	kamilaroi	02/11/11 07:45 PM
Re: 25-06 into 9.3x62	9.3x57	02/11/11 11:41 PM
Re: 25-06 into 9.3x62	AFRO408	03/11/11 02:35 PM
Re: 25-06 into 9.3x62	500Nitro	03/11/11 02:38 PM
Re: 25-06 into 9.3x62	AFRO408	05/11/11 03:34 PM
Re: 25-06 into 9.3x62	500Nitro	01/11/11 08:00 PM
Re: 25-06 into 9.3x62	tophet1	01/11/11 08:15 PM
Re: 25-06 into 9.3x62	MarkR	01/11/11 08:23 PM
Re: 25-06 into 9.3x62	FATBOY404	07/11/11 09:44 PM
Re: 25-06 into 9.3x62	DarylS	08/11/11 03:47 AM
Re: 25-06 into 9.3x62	Oldsarge	08/11/11 01:57 PM
Re: 25-06 into 9.3x62	MarkR	08/11/11 07:02 PM
Re: 25-06 into 9.3x62	FATBOY404	08/11/11 08:22 PM
Re: 25-06 into 9.3x62	MarkR	08/11/11 08:46 PM
Re: 25-06 into 9.3x62	AFRO408	08/11/11 07:24 PM
Re: 25-06 into 9.3x62	FATBOY404	08/11/11 08:27 PM
Re: 25-06 into 9.3x62	tophet1	07/12/11 03:55 PM
Re: 25-06 into 9.3x62	AFRO408	09/11/11 07:54 AM
Re: 25-06 into 9.3x62	FATBOY404	09/11/11 08:27 AM
Re: 25-06 into 9.3x62	AFRO408	10/11/11 05:20 PM
Re: 25-06 into 9.3x62	MarkR	10/11/11 05:37 PM
Re: 25-06 into 9.3x62	AFRO408	17/11/11 04:14 PM
Re: 25-06 into 9.3x62	Rigby350	17/11/11 06:56 PM
Re: 25-06 into 9.3x62	MarkR	17/11/11 09:44 PM
Re: 25-06 into 9.3x62	DarylS	18/11/11 04:29 AM
Re: 25-06 into 9.3x62	AFRO408	18/11/11 07:39 AM
Re: 25-06 into 9.3x62	Oldsarge	19/11/11 05:22 PM
Re: 25-06 into 9.3x62	MarkR	07/12/11 11:49 AM
Re: 25-06 into 9.3x62	Viking338	07/12/11 03:40 PM
Re: 25-06 into 9.3x62	FATBOY404	07/12/11 12:19 PM
Re: 25-06 into 9.3x62	DarylS	07/12/11 12:35 PM
Re: 25-06 into 9.3x62	Sville	18/11/11 05:32 AM
Re: 25-06 into 9.3x62	AFRO408	10/11/11 07:20 PM
Re: 25-06 into 9.3x62	tophet1	10/11/11 07:28 PM
Re: 25-06 into 9.3x62	kamilaroi	10/11/11 07:46 PM
Re: 25-06 into 9.3x62	MarkR	08/11/11 07:44 PM
Re: 25-06 into 9.3x62	AFRO408	08/11/11 07:55 PM
Re: 25-06 into 9.3x62	tophet1	08/11/11 08:09 PM

Extra information

0 registered and 10 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 12851

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved