Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: saeco 740 mould for 450/400NE in Ruger #1

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

209jones
.224 member

Reged: 29/05/11
Posts: 13
Loc: Calgary AB

Re: saeco 740 mould for 450/400NE in Ruger #1
27/10/11 01:15 AM

Loaded up some of the 400gr LBT LFN last nite, 42-46gr AA5744, F215. This time I will remember to take the screens for the chrono with me. Ran the 320WFN up to 52gr AA5744 w/cci250, ended up about 6in left and high on that exercise from where the 48gr load shot, it was still shooting groups over there, not great ones, but, groups that would kill whatever I wanted at 100yds.No pressure signs, once again with some semi-breechseaters. I reloaded some more with 48gr and will test them again today. After I go get a belt cartridge holder and search for a new decap rod for the sizer. Did a real number on it. Hornady brass has a seriously convex base in it around the flash hole, can be hard on the pins and stem. I've had 4 dud rounds so far, all were charged with the CCI250.All the primers still had unused primer compound in them. Can't blame bullet or sizing lube, powder was clean when it was poured out again, reused it.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
saeco 740 mould for 450/400NE in Ruger #1	209jones	17/07/11 05:49 PM
Re: saeco 740 mould for 450/400NE in Ruger #1	209jones	25/08/11 07:22 PM
Re: saeco 740 mould for 450/400NE in Ruger #1	DarylS	26/08/11 01:47 AM
Re: saeco 740 mould for 450/400NE in Ruger #1	209jones	17/09/11 04:23 AM
Re: saeco 740 mould for 450/400NE in Ruger #1	209jones	26/09/11 12:47 PM
Re: saeco 740 mould for 450/400NE in Ruger #1	209jones	23/10/11 03:06 AM
Re: saeco 740 mould for 450/400NE in Ruger #1	DarylS	23/10/11 03:48 AM
Re: saeco 740 mould for 450/400NE in Ruger #1	209jones	27/10/11 01:15 AM
Re: saeco 740 mould for 450/400NE in Ruger #1	209jones	28/10/11 01:41 PM

Extra information

0 registered and 1 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 6395

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved