Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: saeco 740 mould for 450/400NE in Ruger #1

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

209jones
.224 member

Reged: 29/05/11
Posts: 13
Loc: Calgary AB

Re: saeco 740 mould for 450/400NE in Ruger #1
23/10/11 03:06 AM

I picked up a Lyman M die for the 405win (7342387), works beautifully with the 450/400 case. Expander in it was a .410-.412, which happened to be just what I wanted for the LBT bullets. Saves disassembling the Hornady seater die to put the Lyman M style expander into it to do the cases with. In talking with Hornady, the slip collar for the 450/400NE 3" die is the same one as the 405win, with a .415 dia. crimper in it. They will supply custom expanders or different sized collars for the sizing die & seating die, special order. 800-338-3220 ext 261, Ben Syring. And of course the Buffalo Arms custom expanders will fit the M-die or can be installed in the Hornady seater die.I think the BAC custom expanders come from C&H, so they can likely be ordered there also. I think perhaps if I had this to do all over again I might go to C&H for the complete die set, they will set up the dies for whatever combos you want, all from one place, about a 200.00 touch though.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
saeco 740 mould for 450/400NE in Ruger #1	209jones	17/07/11 05:49 PM
Re: saeco 740 mould for 450/400NE in Ruger #1	209jones	25/08/11 07:22 PM
Re: saeco 740 mould for 450/400NE in Ruger #1	DarylS	26/08/11 01:47 AM
Re: saeco 740 mould for 450/400NE in Ruger #1	209jones	17/09/11 04:23 AM
Re: saeco 740 mould for 450/400NE in Ruger #1	209jones	26/09/11 12:47 PM
Re: saeco 740 mould for 450/400NE in Ruger #1	209jones	23/10/11 03:06 AM
Re: saeco 740 mould for 450/400NE in Ruger #1	DarylS	23/10/11 03:48 AM
Re: saeco 740 mould for 450/400NE in Ruger #1	209jones	27/10/11 01:15 AM
Re: saeco 740 mould for 450/400NE in Ruger #1	209jones	28/10/11 01:41 PM

Extra information

0 registered and 47 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5797

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved