Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Ferules/Pillars and bedding generally

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

Homer
.416 member

Reged: 07/04/09
Posts: 3081
Loc: Canberra, Australia

Re: Ferules/Pillars and bedding generally
21/10/11 07:41 PM

G'Day Tentman,

Generally, any Mauser type action (including Brno, Omark 44, etc), where the front action screw, screws into the bottom of the receiver recoil lug. Both the bottom and the rear face of the recoil lug needs to be in full contact with the bedding, after the bedding compound has cured!

On say a Remington 700, prior to bedding, you would apply some bedding tape to all but the rear face of the receiver recoil lug! On any Mauser type action, you would apply it to only the sides and front of the recoil lug! After the bedding compound has cured, I remove this bedding tape from the recoil lug (and various other parts of the receiver/action), and now have a very slight but sufficient clearance at all these critical locations.

I need to get digital camera! As they say, a picture is worth a thousand words!!!

Hope that helps

Doh!
Homer

--------------------
"Beware the Lolly Pop of Mediocrity,
Lick it Once and You Will Suck Forever"

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Ferules/Pillars and bedding generally	Tentman	20/10/11 02:37 PM
Re: Ferules/Pillars and bedding generally	Homer	21/10/11 07:41 PM

Extra information

1 registered and 66 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 1867

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved