Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Brno ZKK 600 9,3x62mm Project

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

DarylS
.700 member

Reged: 10/08/05
Posts: 27006
Loc: Beautiful British Columbia, Ca...

Re: Brno ZKK 600 9,3x62mm Project
20/10/11 02:52 AM

Any time there is metal to metal fitting between the top and bottom metal, without the intermediate piece of metal being ONE with the stock, the stock will split. This is due to the impossibility of a tight fit of the barrled actio in the stock- it is tight only to a moving object - the bottom metal. This cracking happens at the wrist as well as at the recoil lug. Loosness when screws are tight is the reason 90% of Husky's rifle's are cracked through the wrist - the steel tube prevents a compressed wood fit between the bottom and top metal after the wood shrinks or compresses slighlty. It appoears part of the steel tube has been removed and the bottom tang area bedded to allow a hard fit. I suggest the cracked wrist was pre-bedding.

Is the crack though the recoil lug surface in the bedding,or underneath it? Being fired when the guard screws are loose, will crack most any stock throught that area.

The bedding at the recoil lug looks fine to me.

If the crack is through the bedding, I would dremel it out, sprad the crack as much as possible, then inject heated thin acraglass into the crack and use cross bolts through the recoil lug and behind the tang, then re-bed the barreled action. A steel crossbolt could have been inlet into the recoil lug but as the stock is already cracked, a cross bolt, side to side is indicated, in my opinion.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Brno ZKK 600 9,3x62mm Project	TilleyMan	20/10/11 12:13 AM
Re: Brno ZKK 600 9,3x62mm Project	Sville	20/10/11 02:13 AM
Re: Brno ZKK 600 9,3x62mm Project	DarylS	20/10/11 02:52 AM
Re: Brno ZKK 600 9,3x62mm Project	FATBOY404	20/10/11 07:58 AM
Re: Brno ZKK 600 9,3x62mm Project	9.3x57	20/10/11 01:04 PM
Re: Brno ZKK 600 9,3x62mm Project	kamilaroi	20/10/11 03:04 PM
Re: Brno ZKK 600 9,3x62mm Project	JDL	22/10/11 11:16 AM
Re: Brno ZKK 600 9,3x62mm Project	GK	22/10/11 06:42 PM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	22/10/11 07:40 PM
Re: Brno ZKK 600 9,3x62mm Project	GK	22/10/11 09:38 PM
Re: Brno ZKK 600 9,3x62mm Project	AdamTayler	24/11/11 01:51 PM
Re: Brno ZKK 600 9,3x62mm Project	Igorrock	12/01/12 05:34 AM
Re: Brno ZKK 600 9,3x62mm Project	FATBOY404	12/01/12 06:37 AM
Re: Brno ZKK 600 9,3x62mm Project	tophet1	12/01/12 07:34 AM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	12/01/12 07:04 PM
Re: Brno ZKK 600 9,3x62mm Project	Rule303	12/01/12 10:01 PM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	14/01/12 03:38 PM
Re: Brno ZKK 600 9,3x62mm Project	CHAPUISARMES	14/01/12 04:12 PM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	15/07/12 08:09 PM
Re: Brno ZKK 600 9,3x62mm Project	AFRO408	15/07/12 08:49 PM
Re: Brno ZKK 600 9,3x62mm Project	Ben	15/07/12 09:25 PM
Re: Brno ZKK 600 9,3x62mm Project	Rule303	15/07/12 11:51 PM
Re: Brno ZKK 600 9,3x62mm Project	DarylS	16/07/12 02:23 AM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	16/07/12 06:36 AM
Re: Brno ZKK 600 9,3x62mm Project	DarylS	17/07/12 01:26 AM
Re: Brno ZKK 600 9,3x62mm Project	TilleyMan	17/07/12 12:04 PM
Re: Brno ZKK 600 9,3x62mm Project	DarylS	18/07/12 01:42 AM
Re: Brno ZKK 600 9,3x62mm Project	CHAPUISARMES	12/01/12 07:25 PM
Re: Brno ZKK 600 9,3x62mm Project	tophet1	12/01/12 08:53 PM
Re: Brno ZKK 600 9,3x62mm Project	CHAPUISARMES	22/10/11 07:39 PM
Re: Brno ZKK 600 9,3x62mm Project	Poss	22/10/11 07:26 PM

Extra information

1 registered and 244 anonymous users are browsing this forum.

Moderator: NitroX

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 55893

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved