Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Built a load for my Merkel 141E in 9.3x74R target included

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles

carpediem4570
.300 member

Reged: 28/06/08
Posts: 219
Loc: Alberta, Canada

Re: Working up a load for my Merkel 141E in 9.3x74R
06/10/11 05:56 AM

Hello Chapuisarmes:

Yes, I have Graeme's book and it is a wealth of information. However, in this instance the regulation of my Merkel will be made very easy because this rifle, the 141E, is the rifle with the adjustable barrel regulation device. There are two hex screws at the front of the barrels for adjusting the point of impact of the left barrel. I will post the final target when I get out to the range this weekend.

Hey Daryl S:

Good to hear from you again.
I purchased my rifle from tradeex and had a couple of boxs of projectiles sent along with the gun. I didn't care for the Vulcan bullets because I don't want to pay for the shipping so I chose a bullet that was readily available at Wholesale Sports.

Being a reloader, it would be silly not to work up the "perfect" load for this rifle.

Eventually I will start working on a load using the 286 grain bullets.

For now, this load will be used for bear, deer and moose this year.

Kind regards,

Carpediem

--------------------
Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways-Chrdonnay in one hand-Chocolate in the other-body thoroughly used up, totally worn out and screaming "WHOO-HOO, WHAT A RIDE!!"

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Built a load for my Merkel 141E in 9.3x74R target included	carpediem4570	05/10/11 06:09 PM
Re: Working up a load for my Merkel 141E in 9.3x74R	CHAPUISARMES	05/10/11 06:22 PM
Re: Working up a load for my Merkel 141E in 9.3x74R	DarylS	06/10/11 01:57 AM
Re: Working up a load for my Merkel 141E in 9.3x74R	carpediem4570	06/10/11 05:56 AM
Re: Working up a load for my Merkel 141E in 9.3x74R	mauserand9mm	06/10/11 09:51 AM
Re: Working up a load for my Merkel 141E in 9.3x74R	mauserand9mm	07/10/11 10:18 AM
Re: Working up a load for my Merkel 141E in 9.3x74R	DarylS	06/10/11 11:14 AM

Extra information

0 registered and 49 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3438

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved