Quote:

---

Haven't used them but for plinking they are fine.

BUT check the diameter of the bullets with a caliper before using. Have been known to be incorrect sizes.

.

---

I've purchased a fair few for myself and mates. Measured his 308" (x200), 311" (x200), 408" (x50), 358" (x250), 458" (x150), 510" (x150) ... all fine except for the noted taper with a very few 'wasp-waisted' in that the heel was full diameter, they then drop off, then come back to just undersized at the cannelure.

I'm waiting on his 215gr in the 303Brit, plus he'll do a 0.620" at some stage and was talking about a 250gr spitzer a la the Siera MatchKing.

From memory ... weren't many of the original Kynoch projectiles similarly shaped in that they were full sized only at the heel but then tended to be undersized as you went forward?
Cheers...
Con

Edited by Con (18/09/11 10:24 AM)

Post Extras