Home | Ezine | Forums | Links | Contact
NitroExpress.com: saeco 740 mould for 450/400NE in Ruger #1

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

209jones
.224 member


Reged: 29/05/11
Posts: 13
Loc: Calgary AB
Re: saeco 740 mould for 450/400NE in Ruger #1
      25/08/11 07:22 PM

The hard shot brought it up to .4115, but for some reason I was still getting some small ones in there. Was not consistent with that batch of shot blend. I was quite surprised with that issue.
In the meantime I picked up two LBT moulds for it, both .412 nominal. One is a 320grWFN-GC and the other is a 400grLFN-GC. They both turned out .4135 dia with wheelweights and 1/20. They also came out average 2 gr heavier than marked with those blends. They were both cut to use .416 gator checks,put them on thru a .412 sizer from Buffalo Arms with some LBT soft blue lube. The sizer brought them down to .4125.
Now I am in the hurry up and wait mode for an M-die expander from Buffalo, hopefully it will arrive in the next couple of days.
I will load up some rounds with Trailboss, 5744 and very likely some H4831 for the first session at it.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* saeco 740 mould for 450/400NE in Ruger #1 209jones 17/07/11 05:49 PM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 209jones   25/08/11 07:22 PM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 DarylSModerator   26/08/11 01:47 AM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 209jones   17/09/11 04:23 AM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 209jones   26/09/11 12:47 PM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 209jones   23/10/11 03:06 AM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 DarylSModerator   23/10/11 03:48 AM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 209jones   27/10/11 01:15 AM
. * * Re: saeco 740 mould for 450/400NE in Ruger #1 209jones   28/10/11 01:41 PM

Extra information
0 registered and 50 anonymous users are browsing this forum.

Moderator:  DarylS 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5799

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved