Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Paper Patch loads in my 450-400 2 3/8"

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

DarylS
.700 member

Reged: 10/08/05
Posts: 27103
Loc: Beautiful British Columbia, Ca...

Re: Paper Patch loads in my 450-400 2 3/8"
27/07/11 01:00 AM

I hadn't looked closely as to the height of the patch - Curls' right, of course. The patch should come over the 'corner' of the ogive. Another reason for that, is to prevent the start of the rifling throat from pushing it back on the bullet, exposing the bare shank to the rifling, which will destroy accuracy.

That's quite a slow tapered bullet - it's difficul to see where the ogive starts.

There is no velocity limit for a properly alloyed paper patched bullet. I know this isn't important for this round - just a note for those wondering about that.

The Lee sizing wax is a good idea for patch lube.

The plain based bullet should give as good accuracy. It appears you are using Lee Liqid Alox. I suggest SPG, Lyman's BP Gold or 60:40 of beeswax/Vasline for lube, instead.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Entire topic
Subject	Posted by	Posted on
Paper Patch loads in my 450-400 2 3/8"	AFRO408	22/07/11 05:14 PM
Re: Paper Patch loads in my 450-400 2 3/8"	Ben	22/07/11 05:39 PM
Re: Paper Patch loads in my 450-400 2 3/8"	AFRO408	22/07/11 07:00 PM
Re: Paper Patch loads in my 450-400 2 3/8"	CptCurl	22/07/11 08:15 PM
Re: Paper Patch loads in my 450-400 2 3/8"	DarylS	23/07/11 01:23 AM
Re: Paper Patch loads in my 450-400 2 3/8"	AFRO408	25/07/11 08:30 PM
Re: Paper Patch loads in my 450-400 2 3/8"	DarylS	26/07/11 02:09 AM
Re: Paper Patch loads in my 450-400 2 3/8"	CptCurl	26/07/11 08:47 PM
Re: Paper Patch loads in my 450-400 2 3/8"	AFRO408	27/07/11 08:37 AM
Re: Paper Patch loads in my 450-400 2 3/8"	DarylS	27/07/11 11:03 AM
Re: Paper Patch loads in my 450-400 2 3/8"	AFRO408	27/07/11 04:12 PM
Re: Paper Patch loads in my 450-400 2 3/8"	CptCurl	27/07/11 09:37 PM
Re: Paper Patch loads in my 450-400 2 3/8"	AFRO408	28/07/11 08:21 AM
Re: Paper Patch loads in my 450-400 2 3/8"	DarylS	28/07/11 03:02 AM
Re: Paper Patch loads in my 450-400 2 3/8"	AFRO408	28/07/11 08:30 AM
Re: Paper Patch loads in my 450-400 2 3/8"	DarylS	28/07/11 09:36 AM
Re: Paper Patch loads in my 450-400 2 3/8"	AFRO408	29/07/11 05:51 PM
Re: Paper Patch loads in my 450-400 2 3/8"	DarylS	30/07/11 01:07 AM
Re: Paper Patch loads in my 450-400 2 3/8"	AFRO408	30/07/11 01:47 PM
Re: Paper Patch loads in my 450-400 2 3/8"	AFRO408	24/01/12 05:48 PM
Re: Paper Patch loads in my 450-400 2 3/8"	tophet1	24/01/12 06:47 PM
Re: Paper Patch loads in my 450-400 2 3/8"	DarylS	25/01/12 05:03 AM
Re: Paper Patch loads in my 450-400 2 3/8"	AFRO408	25/01/12 08:06 AM
Re: Paper Patch loads in my 450-400 2 3/8"	DarylS	27/07/11 01:00 AM
Re: Paper Patch loads in my 450-400 2 3/8"	Ben	22/07/11 08:20 PM

Extra information

0 registered and 6 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 14330

Jump to

NitroExpress.com

Home | Ezine | Forums | Links | Contact