Home | Ezine | Forums | Links | Contact
NitroExpress.com: Husqvarna Mod 4 RB 20 ga

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

DarylS
.700 member


Reged: 10/08/05
Posts: 26413
Loc: Beautiful British Columbia, Ca...
Re: Husqvarna Mod 4 RB 20 ga
      28/06/11 02:08 AM

Quote:

Thanks for the replies & suggestions. Will try to post some photos of the full rifle at some stage. I plan to use this rifle for deer - Fallow & Reds which we have in the local region.

Daryl - I'll have a go at increasing the powder charge. Have just got hold of a .635 RB so will try that bare and with a cloth patch. Should I lube the patch? The front sight is way too low already to consider using something shorter.
Thanks
Spud




A cloth patch needs to be lubricated. It not only protects the cloth from tearing or wearing holes from the lands as well as sealing gas pressure behind, it leaves lube in the bore & in the fouling to soften the fouling so the next shot is not effected and the fouling. As each patched ball travels down the stube, the fouling is wiped from the bore. The lube from that patch, softens the fouling left by that shot. This happens over and over and over, and the bore never builds up fouling - what I like to call, shooting cleanly.

If the fouling builds up, caking and reducing accuracy, the lube isn't good enough, or there isn't enough of it.

If the rifle shoots low, the front sight has to be lowered (or the rear sight is raised) to raise the point of impact.

If the rifle shoots high the front sight must be raised (or the rear sight is lowered) to lower the point of impact.

--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Husqvarna Mod 4 RB 20 ga Spud303 26/06/11 06:19 PM
. * * Re: Husqvarna Mod 4 RB 20 ga rigbymauser   26/06/11 06:53 PM
. * * Re: Husqvarna Mod 4 RB 20 ga rigbymauser   26/06/11 07:20 PM
. * * Re: Husqvarna Mod 4 RB 20 ga rglenz   26/06/11 10:18 PM
. * * Re: Husqvarna Mod 4 RB 20 ga lancaster   27/06/11 03:10 AM
. * * Re: Husqvarna Mod 4 RB 20 ga Spud303   27/06/11 07:36 PM
. * * Re: Husqvarna Mod 4 RB 20 ga DarylS   28/06/11 02:08 AM
. * * Re: Husqvarna Mod 4 RB 20 ga lancaster   28/06/11 03:19 AM
. * * Re: Husqvarna Mod 4 RB 20 ga tinkerModerator   28/06/11 03:34 AM
. * * Re: Husqvarna Mod 4 RB 20 ga lancaster   28/06/11 05:10 AM
. * * Re: Husqvarna Mod 4 RB 20 ga Spud303   28/06/11 04:50 PM
. * * Re: Husqvarna Mod 4 RB 20 ga lancaster   29/06/11 01:46 AM
. * * Re: Husqvarna Mod 4 RB 20 ga BillfromOregon   31/10/14 10:13 AM
. * * Re: Husqvarna Mod 4 RB 20 ga tinkerModerator   31/10/14 10:42 AM
. * * Re: Husqvarna Mod 4 RB 20 ga Iowa_303s   31/10/14 11:23 AM
. * * Re: Husqvarna Mod 4 RB 20 ga Ash   01/11/14 12:16 AM
. * * Re: Husqvarna Mod 4 RB 20 ga Iowa_303s   01/11/14 02:27 AM
. * * Re: Husqvarna Mod 4 RB 20 ga 4al2   09/11/14 03:18 PM
. * * Re: Husqvarna Mod 4 RB 20 ga bigskybound   18/06/15 01:06 AM
. * * Re: Husqvarna Mod 4 RB 20 ga DarylS   27/06/11 02:10 AM
. * * Re: Husqvarna Mod 4 RB 20 ga brandoninaz   09/10/15 12:03 PM
. * * Re: Husqvarna Mod 4 RB 20 ga DarylS   10/10/15 03:22 AM
. * * Re: Husqvarna Mod 4 RB 20 ga brandoninaz   10/10/15 09:43 AM

Extra information
0 registered and 15 anonymous users are browsing this forum.

Moderator:  tinker 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 19034

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved