Home | Ezine | Forums | Links | Contact
NitroExpress.com: Husky 33 rolling block pressures

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

DarylS
.700 member


Reged: 10/08/05
Posts: 27000
Loc: Beautiful British Columbia, Ca...
Re: Husky 33 rolling block pressures
      25/06/11 02:25 AM

I always lubed the outside of the paper-patched bullet with a 50/50 mix of BW and Vaseline. It was soft enough to easily rub into the paper.

The barrel's throat and bore should be good for 15,000 to 30,000 rounds.

Ross Seyfried wrote a couple articles in Handloader magazine on paper patching jacketed bullets to increase their size where proper sized bullets were hard to find.
here is my patching board, set up for either .45 or .50 cal bullets. The groove, about 1/8" wide, allows the bullet and paper to start with a tighter fit together, than on a flat surface - at least that was the originator's intent and how it worked for me- and my brother. We both use patching boards. use of the board made it much easier for us to get a tight patch. The patch, is slightly 'wetted' and due to the cotton content, shrinks tightly to the bullet. I placed the 310gr. .375 lubed bulet on the board merely for effect. The steel plate is the patch cutting template wherein many patches can be cut at once - depending on the sharpness of the blade being used. Some people use an office paper shear, which also works very well.



--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Edited by CptCurl (25/06/11 09:07 PM)

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Husky 33 rolling block pressures Tom_H 15/06/11 08:56 PM
. * * Re: Husky 33 rolling block pressures DarylS   16/06/11 01:22 AM
. * * Re: Husky 33 rolling block pressures lancaster   16/06/11 03:19 AM
. * * Re: Husky 33 rolling block pressures Tom_H   16/06/11 07:30 AM
. * * Re: Husky 33 rolling block pressures fuhrmann   17/06/11 08:00 PM
. * * Re: Husky 33 rolling block pressures DarylS   17/06/11 11:42 PM
. * * Re: Husky 33 rolling block pressures fuhrmann   18/06/11 01:02 AM
. * * Re: Husky 33 rolling block pressures Tom_H   18/06/11 07:41 AM
. * * Re: Husky 33 rolling block pressures fuhrmann   18/06/11 05:55 PM
. * * Re: Husky 33 rolling block pressures DarylS   19/06/11 02:08 AM
. * * Re: Husky 33 rolling block pressures Tom_H   19/06/11 02:37 AM
. * * Re: Husky 33 rolling block pressures Tom_H   19/06/11 10:07 AM
. * * Re: Husky 33 rolling block pressures fuhrmann   20/06/11 02:30 PM
. * * Re: Husky 33 rolling block pressures Tom_H   21/06/11 06:57 AM
. * * Re: Husky 33 rolling block pressures DarylS   21/06/11 12:40 PM
. * * Re: Husky 33 rolling block pressures fuhrmann   21/06/11 04:52 PM
. * * Re: Husky 33 rolling block pressures Tom_H   22/06/11 09:26 AM
. * * Re: Husky 33 rolling block pressures fuhrmann   22/06/11 04:26 PM
. * * Re: Husky 33 rolling block pressures DarylS   23/06/11 12:41 AM
. * * Re: Husky 33 rolling block pressures Tom_H   24/06/11 08:14 AM
. * * Re: Husky 33 rolling block pressures DarylS   25/06/11 02:25 AM
. * * Re: Husky 33 rolling block pressures Tom_H   25/06/11 10:07 AM
. * * Re: Husky 33 rolling block pressures fuhrmann   25/06/11 10:35 PM
. * * Re: Husky 33 rolling block pressures FrankS   19/06/11 02:29 PM
. * * Re: Husky 33 rolling block pressures lancaster   18/06/11 02:08 PM
. * * Re: Husky 33 rolling block pressures lancaster   16/06/11 11:43 PM
. * * Re: Husky 33 rolling block pressures DarylS   17/06/11 12:55 AM
. * * Re: Husky 33 rolling block pressures Tom_H   17/06/11 10:49 AM
. * * Re: Husky 33 rolling block pressures lancaster   17/06/11 12:58 PM

Extra information
0 registered and 103 anonymous users are browsing this forum.

Moderator:  Huvius 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 19977

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved