Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Husky 33 rolling block pressures

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

Tom_H
.333 member

Reged: 13/04/05
Posts: 336
Loc: Southeast, NY

Re: Husky 33 rolling block pressures
18/06/11 07:41 AM

I should check my language (and measurements) before posting.

Gentlemen - thank you

It is most definately LONGER than the 30-30 class. Just around 2.25 from rough measurements. The GROOVE diameter (not the bore) is .365 with 6 lands. 27.75" long.

The base of the chamber mics .435, and the rim cut .511.

I had an 8.57r360 case and it fits nicely. Now to order the dies from CH4D.

The stock is walnut with some dents but looks thoroughly servicable. 2.75" of drop at the heel. With a pull of 13.5"

The hammer was broken sometime in the distant past, but someone took the effort to rebraise it and they did a credible job at that.

Overall the gun needs some work but it appears to be correct where it has to be.

My only concern is the bullet diameter and although the bore looks ok, I was surprised to see it closer to .366 than .363 like the 9.3x72r.

Hopefully by fall I may get the opportunity to take a whitetail with it.
Fuhrmann, have you taken that roe yet?

Tom

--------------------
Carbonation without fermentation is tyranny

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Husky 33 rolling block pressures	Tom_H	15/06/11 08:56 PM
Re: Husky 33 rolling block pressures	DarylS	16/06/11 01:22 AM
Re: Husky 33 rolling block pressures	lancaster	16/06/11 03:19 AM
Re: Husky 33 rolling block pressures	Tom_H	16/06/11 07:30 AM
Re: Husky 33 rolling block pressures	fuhrmann	17/06/11 08:00 PM
Re: Husky 33 rolling block pressures	DarylS	17/06/11 11:42 PM
Re: Husky 33 rolling block pressures	fuhrmann	18/06/11 01:02 AM
Re: Husky 33 rolling block pressures	Tom_H	18/06/11 07:41 AM
Re: Husky 33 rolling block pressures	fuhrmann	18/06/11 05:55 PM
Re: Husky 33 rolling block pressures	DarylS	19/06/11 02:08 AM
Re: Husky 33 rolling block pressures	Tom_H	19/06/11 02:37 AM
Re: Husky 33 rolling block pressures	Tom_H	19/06/11 10:07 AM
Re: Husky 33 rolling block pressures	fuhrmann	20/06/11 02:30 PM
Re: Husky 33 rolling block pressures	Tom_H	21/06/11 06:57 AM
Re: Husky 33 rolling block pressures	DarylS	21/06/11 12:40 PM
Re: Husky 33 rolling block pressures	fuhrmann	21/06/11 04:52 PM
Re: Husky 33 rolling block pressures	Tom_H	22/06/11 09:26 AM
Re: Husky 33 rolling block pressures	fuhrmann	22/06/11 04:26 PM
Re: Husky 33 rolling block pressures	DarylS	23/06/11 12:41 AM
Re: Husky 33 rolling block pressures	Tom_H	24/06/11 08:14 AM
Re: Husky 33 rolling block pressures	DarylS	25/06/11 02:25 AM
Re: Husky 33 rolling block pressures	Tom_H	25/06/11 10:07 AM
Re: Husky 33 rolling block pressures	fuhrmann	25/06/11 10:35 PM
Re: Husky 33 rolling block pressures	FrankS	19/06/11 02:29 PM
Re: Husky 33 rolling block pressures	lancaster	18/06/11 02:08 PM
Re: Husky 33 rolling block pressures	lancaster	16/06/11 11:43 PM
Re: Husky 33 rolling block pressures	DarylS	17/06/11 12:55 AM
Re: Husky 33 rolling block pressures	Tom_H	17/06/11 10:49 AM
Re: Husky 33 rolling block pressures	lancaster	17/06/11 12:58 PM

Extra information

0 registered and 138 anonymous users are browsing this forum.

Moderator: Huvius

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 19977

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved