Home | Ezine | Forums | Links | Contact
NitroExpress.com: More 35.303 load development - DOOH

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

Perry
.275 member


Reged: 09/11/10
Posts: 73
Loc: Qld Australia
More 35.303 load development - DOOH
      10/06/11 01:57 PM

Afternoon fella's

Ever reminded yourself about something you already should know after the event !!

450 Ackley was king enough to send me some CBE 358250 projectiles for me to try as I had been considering purchasing this Mould. In my haste to shoot them and see how they would go I loaded a few batches stepping up in 1 grain increments from 38 gr AR2208 up to 41 gr of AR2208, about 4 grains under load data max

The once fired 35.303 cases neck sized , trimmed and cleaned, primers seated just right and exact charges weighed and loaded. The projectiles where sized and pan lubed, seated to the crimping groove approx one calibre deep. There was a magic load ready to jump out at me

I dropped a cartridge into the chamber with a satisfying thunck - closed the Silky smooth SMLE bolt SHIT - YOU BLOODY DILL - I had neglected to make a dummy round to check if these CBE 358250 projectiles would chamber

The projectile was making way too firm contact with the Lands, about a 1/4" from the metplat just below the round nose. The Rifles throat is too short, set up for the Jacketed projectiles I'd originally planned to shoot from the Rifle - I knew that !!!!!! just got carried away.

No harm done, had a few loads for testing in my Rossi 357 Lever so it was not a wasted trip. After some consideration of what I the intended use / want from the Rifle and since the realisation that $1 each is too much for a Jacketed projectile hence my determination to shoot Cast exclusively from it this morning I had a discussion with the Gunsmith who put this Rifle together for me and have left it with him and some sample rounds to have the throat lengthened.

Now I gotta wait a couple more weeks and start again. I also have a heap of Lyman 358315 208 gr proj cast up that I'm curious to see how they will shoot with the longer throat as they showed good potential with the short throat.

regards Jacko

--------------------
"To my deep mortification my father once said to me, 'You care for nothing but shooting, dogs and rat catching, and you will be a disgrace to yourself and all your family.' " -Charles Darwin

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* More 35.303 load development - DOOH Perry 10/06/11 01:57 PM
. * * Re: More 35.303 load development - DOOH 450_Ackley   10/06/11 05:50 PM
. * * Re: More 35.303 load development - DOOH DarylSModerator   11/06/11 12:45 AM
. * * Re: More 35.303 load development - DOOH Tatume   11/06/11 02:00 AM
. * * Re: More 35.303 load development - DOOH Perry   11/06/11 09:15 AM
. * * Re: More 35.303 load development - DOOH DarylSModerator   11/06/11 10:55 AM
. * * Re: More 35.303 load development - DOOH Perry   11/06/11 01:31 PM

Extra information
0 registered and 66 anonymous users are browsing this forum.

Moderator:  DarylS 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2858

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved