Home | Ezine | Forums | Links | Contact
NitroExpress.com: Working up a load

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Muzzleloaders & Blackpowder

DarylSModerator
.700 member


Reged: 10/08/05
Posts: 27803
Loc: Beautiful British Columbia, Ca...
Working up a load
      04/06/11 10:42 AM

How many times have you said, or heard, "the load doesn't matter, I'm only shooting offhand.

The target should show what happens with shooting offhand with a so/so load and shooting offhand with a fairly accurate load.

All shooting was done at 50 yards, off a sandbag, flintlock rifle held in the hands, no rear bag and open iron sights. the rifle was not wiped once during the shooting - which lasted all day long, These targets were shot at the end of a day of load testing, again, no bore wiping at any time. I do my loading with the rifle's 3/8" hickory rod most of the time, but will from time to time, use the longer, handled cleaning rod for loading. That saves having to remove and replace the rifle's rod.

The centre target and the top left were shot with the same load, and the top right, and bottom right were shot with the same load. There were 6 shots fired on the top left target, while all the rest have 5 only.

Note how open the poorer bench load shot, when shot standing. Error is multiplied, which is the fact most often disregarded.

This thread should be about working up an accurate load and how to go about it. Plese feel free to comment or ask questions, post targets, etc. I shoot cloth patched round balls, which is also what I hunt with, when hunting with a muzzleloader and this is what this thread is about.



--------------------
Daryl


"a gun without hammers is like a Spaniel without ears" King George V

Edited by CptCurl (04/07/11 10:38 PM)

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Working up a load DarylSModerator 04/06/11 10:42 AM
. * * Re: Working up a load Tom_H   18/06/11 10:29 AM
. * * Re: Working up a load FATBOY404   18/06/11 01:19 PM
. * * Re: Working up a load DarylSModerator   26/06/11 02:30 AM
. * * Re: Working up a load CptCurlAdministrator   04/07/11 10:39 PM
. * * Re: Working up a load NitroXAdministrator   05/07/11 08:31 PM

Extra information
0 registered and 17 anonymous users are browsing this forum.

Moderator:  DarylS 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 2987

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved