Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: The Flying Rubbish Bin!

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Cast Bullets

450_Ackley
.375 member

Reged: 06/02/03
Posts: 583
Loc: Darling Downs, Qld Australia

Re: The Flying Rubbish Bin!
27/05/11 01:29 PM

For those that are interested, here is a photo of the set-up I use to load the RMC brass cases.
To give you an idea of how heavy they are, a Magtech brass case, the ones with a large rifle primer pocket weigh about 325 grains, whilst these RMC cases weigh 790 grains and use a 209 shotgun primer. I bought the nice little brass loading kit RMC sells when I had the cases made, so I use it to knock out the old primers and seat new ones, then this die comes into play.
In the front of the photo, you can see a small ring, next to the shellholder, this is what RCBS has to size the cases, it screws into the bottom of the die, might be fine of Magtech cases, but no good for these ones, so it is unscrewed and put back in the box, to the right of the die body is a sizing bush. The RCBS dies act a bit like a bushing type sizing die, so I ran with that concept. I had the bush made so that it just sizes the first 3/4" or so of the brass case, just enough to hold a projectile, the next bush is made from an old barrel, and is used to very slightly flare the case mouth, and it doesn't take or need much to work, it has I think about a 1 degree taper to it.
The third bush is a seating bush, it just fits over the nose of the CBE Paradox bullet and rests against the shoulder on the bullet, I use it to squarely seat the bullets in the cases, then swapping over to the RCBS crimp bush that came in the set, it just barely removes the taper put on the case and adds a little extra bullet seating tension. A quick wipe over and we're ready to shoot.
This took a little bit of thinking over, but I'm happy with how it all works, a while on a lathe and you've got all the bits you need.

Regards,
David.

Edited by CptCurl (29/06/11 08:58 AM)

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
The Flying Rubbish Bin!	450_Ackley	23/05/11 05:55 PM
Re: The Flying Rubbish Bin!	Mike_Johnson	29/05/11 11:18 AM
Re: The Flying Rubbish Bin!	450_Ackley	29/05/11 03:19 PM
Re: The Flying Rubbish Bin!	Mike_Johnson	29/05/11 09:48 PM
Re: The Flying Rubbish Bin!	DarylS	30/05/11 02:17 AM
Re: The Flying Rubbish Bin!	Rule303	30/05/11 05:51 PM
Re: The Flying Rubbish Bin!	alexbeer	23/05/11 06:20 PM
Re: The Flying Rubbish Bin!	FATBOY404	23/05/11 06:25 PM
Re: The Flying Rubbish Bin!	450_Ackley	23/05/11 07:03 PM
Re: The Flying Rubbish Bin!	Oldbrit	23/05/11 09:25 PM
Re: The Flying Rubbish Bin!	DarylS	24/05/11 09:53 AM
Re: The Flying Rubbish Bin!	tinker	24/05/11 01:01 PM
Re: The Flying Rubbish Bin!	500Nitro	24/05/11 01:08 PM
Re: The Flying Rubbish Bin!	lancaster	24/05/11 01:53 PM
Re: The Flying Rubbish Bin!	450_Ackley	24/05/11 05:28 PM
Re: The Flying Rubbish Bin!	CptCurl	24/05/11 11:33 PM
Re: The Flying Rubbish Bin!	DarylS	25/05/11 12:13 AM
Re: The Flying Rubbish Bin!	450_Ackley	25/05/11 07:36 AM
Re: The Flying Rubbish Bin!	AFRO408	25/05/11 07:51 PM
Re: The Flying Rubbish Bin!	DarylS	26/05/11 12:04 AM
Re: The Flying Rubbish Bin!	450_Ackley	27/05/11 01:29 PM
Re: The Flying Rubbish Bin!	DarylS	27/05/11 02:33 PM
Re: The Flying Rubbish Bin!	FATBOY404	25/05/11 10:58 AM
Re: The Flying Rubbish Bin!	CptCurl	25/05/11 11:06 AM

Extra information

0 registered and 80 anonymous users are browsing this forum.

Moderator: DarylS

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7129

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved