Home | Ezine | Forums | Links | Contact
NitroExpress.com: Mauser 98 from 1925.

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Shooting & Reloading - Mausers, Big Bores and others >> Mauser Discussion Forum

eagle27
.400 member


Reged: 24/01/09
Posts: 1165
Loc: Rolleston, Christchurch, New Z...
Re: Mauser 98 from 1925.
      18/04/11 03:30 PM

Quote:

Eagle27 you claim that no manufacturer ever loaded 400gr Projectiles for the 10.75x68, well I have old factory loaded DWM ammunition with 400gr RN ! I also have factory 347-350 from Kynoch and DWM




I stand to be corrected if that is the case although I have never seen any 400gr loadings advertised in catalogues or books such as Ludwig Olson's "Mauser Bolt Rifles" which covers the field for the original loadings of RWS and DWM. I also spent a year in Germany and a lot of time with a hunting friend who had a vast collection of firearms, ammunition and catalogues in all the German calibres. Naturally i spent a lot of time looking over everything he had. It was he who gave me components for my .404, not the least a quantity of original RWS 347gr flat nose soft points which shoot very well in my .404.

The question I would have as I put in my earlier post is that the spec COAL for the 10.75x68 means a 400gr bullet would have to be seated very deep, impinging on the already limited powder space for the smallish cartridge case (small to bullet weight and diameter)or seated out to the extent that with the usual blunt nose of FMJ or soft nose bullets I could see difficulties arising with the throat or leade not being long enough. There is just such a difference between the 347gr and 400gr bullets. I have not come across any 400gr .423" bullets that did not have the crimping cannelure set for the .404 COAL so again if 400gr bullets were manufactured specially for the 10.75x68, I would imagine they would have a cannelure specifically set for that cartridge?

The bullet weight for 347grs should be shown as 22.5grams or 26grams for the 401gr bullet on any German manufactured ammo box for the 10.75x68. Can you confirm the gram weights?

I have loaded up a dummy 10.75x68 case with a 400gr bullet crimped at the cannelure and it sure looks a better cartridge that the original with it's stubby little bullet but of course making one such cartridge and getting it to fit an original 10.75x68 Mauser might be different.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Mauser 98 from 1925. Sville 06/04/11 04:14 AM
. * * Re: Mauser 98 from 1925. dons   06/04/11 06:43 AM
. * * Re: Mauser 98 from 1925. mauserand9mm   06/04/11 08:51 AM
. * * Re: Mauser 98 from 1925. xausa   06/04/11 09:13 AM
. * * Re: Mauser 98 from 1925. 9.3x57   06/04/11 12:00 PM
. * * Re: Mauser 98 from 1925. 4seventy   07/04/11 08:38 AM
. * * Re: Mauser 98 from 1925. 9.3x57   07/04/11 11:27 AM
. * * Re: Mauser 98 from 1925. 4seventy   07/04/11 03:18 PM
. * * Re: Mauser 98 from 1925. DarylS   07/04/11 12:05 AM
. * * Re: Mauser 98 from 1925. lancaster   07/04/11 02:39 AM
. * * Re: Mauser 98 from 1925. DarylS   08/04/11 02:41 AM
. * * Re: Mauser 98 from 1925. lancaster   08/04/11 04:25 AM
. * * Re: Mauser 98 from 1925. eagle27   08/04/11 04:14 PM
. * * Re: Mauser 98 from 1925. 4seventy   08/04/11 05:19 PM
. * * Re: Mauser 98 from 1925. eagle27   08/04/11 08:15 PM
. * * Re: Mauser 98 from 1925. pablo_mauser_66   18/04/11 09:31 AM
. * * Re: Mauser 98 from 1925. eagle27   18/04/11 03:30 PM
. * * Re: Mauser 98 from 1925. pablo_mauser_66   18/04/11 07:17 PM
. * * Re: Mauser 98 from 1925. pablo_mauser_66   18/04/11 07:20 PM
. * * Re: Mauser 98 from 1925. eagle27   19/04/11 06:18 PM
. * * Re: Mauser 98 from 1925. pablo_mauser_66   19/04/11 07:11 PM
. * * Re: Mauser 98 from 1925. pablo_mauser_66   03/05/11 06:10 PM
. * * Re: Mauser 98 from 1925. eagle27   03/05/11 06:52 PM
. * * Re: Mauser 98 from 1925. pablo_mauser_66   18/04/11 05:14 PM
. * * Re: Mauser 98 from 1925. FATBOY404   18/04/11 05:33 PM
. * * Re: Mauser 98 from 1925. salar73   16/09/11 02:35 AM
. * * Re: Mauser 98 from 1925. Huvius   17/09/11 01:05 AM
. * * Re: Mauser 98 from 1925. 4seventy   08/04/11 09:08 PM
. * * Re: Mauser 98 from 1925. VonGruff   09/04/11 06:15 AM
. * * Re: Mauser 98 from 1925. 4seventy   09/04/11 10:39 AM
. * * Re: Mauser 98 from 1925. eljefedouble   11/04/11 10:05 PM
. * * Re: Mauser 98 from 1925. Ben   11/04/11 10:33 PM
. * * Re: Mauser 98 from 1925. Sville   07/04/11 06:13 AM

Extra information
0 registered and 244 anonymous users are browsing this forum.

Moderator:  NitroX 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 37403

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved