Home | Ezine | Forums | Links | Contact
NitroExpress.com: A Question for Reloaders of 9.3x74R

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***
You are not logged in. [Login] Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Double Rifles
Previous thread Previous   View all threads Index   Next thread Next   Flat Mode Flat  

DennisDaigger
.224 member


Reged: 27/01/11
Posts: 47
Loc: Alaska
Re: A Question for Reloaders of 9.3x74R
      21/03/11 01:19 PM

After the last post, I got curious about other 9.3x74 brass I had on hand and here is some additional info:
.012" neck thickness RWS brass
.013" neck thickness Hornady brass

If you increase the expander ball diameter to accommodate the Lee equipment you might reduce your bullet neck tension too much for best hunting performance. I doubt two thousandths of an inch under for neck I.D. is optimal for .366 bullets
and maybe not adequate with Norma .365 bullets. If your original expander ball is .3645 and your rebound is .0015 as mine was then you will have .002 or .003 for neck tension depending on the bullet used.

I'm guessing your .362" of neck I.D. coming out of the FL size die using the original expander ball is just about optimal for the cartridge. I shoot Norma, Hornady, Speer and A-Square bullets in three rifles and the die producing .362 I.D. has worked well for all.

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* A Question for Reloaders of 9.3x74R carpediem4570 16/03/11 11:19 AM
. * * Re: A Question for Reloaders of 9.3x74R Tatume   20/03/11 10:37 PM
. * * Re: A Question for Reloaders of 9.3x74R Tatume   21/03/11 03:22 AM
. * * Re: A Question for Reloaders of 9.3x74R Sparky   21/03/11 08:31 AM
. * * Re: A Question for Reloaders of 9.3x74R DarylS   17/03/11 01:06 AM
. * * Re: A Question for Reloaders of 9.3x74R DennisDaigger   17/03/11 10:48 AM
. * * Re: A Question for Reloaders of 9.3x74R carpediem4570   17/03/11 02:14 PM
. * * Re: A Question for Reloaders of 9.3x74R DennisDaigger   21/03/11 09:08 AM
. * * Re: A Question for Reloaders of 9.3x74R DennisDaigger   21/03/11 01:19 PM
. * * Re: A Question for Reloaders of 9.3x74R DarylS   22/03/11 11:08 PM
. * * Re: A Question for Reloaders of 9.3x74R carpediem4570   24/03/11 03:03 AM
. * * Re: A Question for Reloaders of 9.3x74R Tatume   17/03/11 09:38 PM
. * * Re: A Question for Reloaders of 9.3x74R DarylS   18/03/11 01:44 AM
. * * Re: A Question for Reloaders of 9.3x74R Tatume   18/03/11 01:51 AM
. * * Re: A Question for Reloaders of 9.3x74R DarylS   18/03/11 02:13 AM
. * * Re: A Question for Reloaders of 9.3x74R Sparky   18/03/11 12:42 PM
. * * Re: A Question for Reloaders of 9.3x74R carpediem4570   18/03/11 02:08 AM

Extra information
0 registered and 450 anonymous users are browsing this forum.

Moderator:  CptCurl 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 7096

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved