Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: My 35.303 is Finally Finished

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Rifles

mauserand9mm
.400 member

Reged: 03/09/09
Posts: 1039
Loc: Queensland, Australia

Re: My 35.303 is Finally Finished
16/02/11 09:01 AM

I do agree with the last statement regarding full length sizing and rimless cases. Most FLS dies will size too far in most instances, if you set it up according to the instructions only. They have to size to minimum headspace dimensions to cater for all possible firearms that the brass could be used in, which means in many instances the brass is being resized too far and creating excessive headspace and poor case life wrt incipent head separations.

FLS dies need to be set up to suit the rifle and this is easy enough to do once you have some fired brass to test the die settings with - only resize as far so that chambering of the case results in slight resistance when closing the bolt (you know the shoulder is contacting the front of the chamber that way). Many people are aware of this and many aren't.

(Sidenote: There are also FLS dies available for using brass in semi-autos where some extra headspace is required to ensure reliable feeding. The dies will resize the headspace length below normal. Brass is generally only fired once and then discarded because it will likely have the tell tale ring above the web. Having said that, when I had my M14 [back in the good old days] I still set my FLS die up to suit the rifle and never had a malfunction and got good case life - about 15 reloads if I recall correctly.)

450 Ackley - what sort of life did you get out of your 303 cases? I've never seen better than 5 or 6 reloads where headspacing was done on the shoulder (only because it was excessive off the rim).

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
My 35.303 is Finally Finished	Perry	31/01/11 11:23 PM
Re: My 35.303 is Finally Finished	mehulkamdar	05/02/11 03:23 AM
Re: My 35.303 is Finally Finished	Perry	14/02/11 07:11 AM
Re: My 35.303 is Finally Finished	Rule303	14/02/11 12:25 PM
Re: My 35.303 is Finally Finished	Perry	14/02/11 08:11 PM
Re: My 35.303 is Finally Finished	ovny	14/02/11 08:26 PM
Re: My 35.303 is Finally Finished	DarylS	15/02/11 03:16 AM
Re: My 35.303 is Finally Finished	mauserand9mm	15/02/11 08:57 AM
Re: My 35.303 is Finally Finished	DarylS	15/02/11 09:45 AM
Re: My 35.303 is Finally Finished	mauserand9mm	15/02/11 02:39 PM
Re: My 35.303 is Finally Finished	450_Ackley	15/02/11 05:25 PM
Re: My 35.303 is Finally Finished	Perry	15/02/11 10:17 PM
Re: My 35.303 is Finally Finished	DarylS	16/02/11 01:40 AM
Re: My 35.303 is Finally Finished	mauserand9mm	16/02/11 09:01 AM
Re: My 35.303 is Finally Finished	450_Ackley	16/02/11 03:51 PM
Re: My 35.303 is Finally Finished	mauserand9mm	16/02/11 05:11 PM
Re: My 35.303 is Finally Finished	DarylS	17/02/11 03:50 AM
Re: My 35.303 is Finally Finished	Rule303	20/02/11 07:35 PM
Re: My 35.303 is Finally Finished	mauserand9mm	17/02/11 08:44 AM
Re: My 35.303 is Finally Finished	NitroX	31/01/11 11:51 PM
Re: My 35.303 is Finally Finished	rigbymauser	01/02/11 04:03 AM
Re: My 35.303 is Finally Finished	Perry	01/02/11 06:49 AM
Re: My 35.303 is Finally Finished	Ben	01/02/11 07:04 AM
Re: My 35.303 is Finally Finished	458Shooter	02/02/11 07:22 AM
Re: My 35.303 is Finally Finished	Rule303	02/02/11 10:33 AM
Re: My 35.303 is Finally Finished	NitroX	02/02/11 03:20 PM
Re: My 35.303 is Finally Finished	DarylS	03/02/11 08:49 AM

Extra information

2 registered and 43 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 13489

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved