Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: cast loads in 458WM

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Big Bore Rifles

mauserand9mm
.400 member

Reged: 03/09/09
Posts: 1041
Loc: Queensland, Australia

Re: cast loads in 458WM
05/11/10 09:57 AM

They are 0.459" - I made sure of that after I had dramas with the 405gn projectiles at 0.458". Only a small portion of the 0.458" hit the target at 100 yards and those that did were completely sideways - if fact you could hear that were unstable from the muzzle due to the weird noise they made. The 500gns sound normal so I thought they may be losing stability further down range due to the low initial velocity but I guess once they've been "spun-up" they shouldn't lose stability since the spin doesn't appreciably drop off as it travels down range.

There was no evidence of leading with the 500gn either but at 900fps I wouldn't have expected any.

I have to keep these below 1700fps as they don't have gas checks and use a dry coating of some sort. I have a Lyman reloading manual that identify the velocities I want using the IMR equivalents of AR2205 and AR2207 but am keen to get feedback from others that may have used the AR powders and in the CZ, but all comments/suggestions appreciated.

Interesting (frustrating?) playing around with lead. I recently discovered that my Traiboss loads and the 405gn projectiles are good at 20gns but accuracy dissappears with 21gns (keyhole, not all hitting the target etc) - no leading and no weird sounds either.

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
cast loads in 458WM	mauserand9mm	07/03/10 09:00 PM
Re: cast loads in 458WM	bonanza	30/04/10 12:49 AM
Re: cast loads in 458WM	mauserand9mm	30/04/10 08:41 PM
Re: cast loads in 458WM	mauserand9mm	17/05/10 01:29 PM
Re: cast loads in 458WM	mauserand9mm	05/11/10 07:59 AM
Re: cast loads in 458WM	DarylS	05/11/10 11:49 AM
Re: cast loads in 458WM	mauserand9mm	05/11/10 09:57 AM
Re: cast loads in 458WM	DarylS	06/11/10 03:32 AM
Re: cast loads in 458WM	VonGruff	06/11/10 05:58 AM
Re: cast loads in 458WM	mauserand9mm	07/11/10 08:39 PM
Re: cast loads in 458WM	Tatume	07/03/10 11:01 PM
Re: cast loads in 458WM	bonanza	08/11/10 03:17 AM
Re: cast loads in 458WM	mauserand9mm	08/03/10 10:30 AM
Re: cast loads in 458WM	Tatume	08/03/10 11:35 PM
Re: cast loads in 458WM	mauserand9mm	09/03/10 11:31 AM
Re: cast loads in 458WM	450_Ackley	09/03/10 04:28 PM
Re: cast loads in 458WM	Tatume	09/03/10 11:12 PM
Re: cast loads in 458WM	DarylS	10/03/10 03:26 AM
Re: cast loads in 458WM	450_Ackley	10/03/10 07:38 AM
Re: cast loads in 458WM	mauserand9mm	10/03/10 11:52 AM
Re: cast loads in 458WM	Tatume	11/03/10 12:24 AM
Re: cast loads in 458WM	DarylS	11/03/10 12:40 PM
Re: cast loads in 458WM	450	11/03/10 04:39 PM
Re: cast loads in 458WM	mauserand9mm	11/03/10 10:19 PM
Re: cast loads in 458WM	DarylS	12/03/10 01:49 AM
Re: cast loads in 458WM	mauserand9mm	12/03/10 11:29 AM
Re: cast loads in 458WM	DarylS	13/03/10 04:00 AM
Re: cast loads in 458WM	Tatume	13/03/10 06:45 AM
Re: cast loads in 458WM	gwindrider1	16/03/10 12:28 PM
Re: cast loads in 458WM	mauserand9mm	18/03/10 11:44 AM
Re: cast loads in 458WM	450_Ackley	18/03/10 07:04 PM
Re: cast loads in 458WM	450	23/03/10 08:24 PM
Re: cast loads in 458WM	DarylS	24/03/10 07:12 AM
Re: cast loads in 458WM	mauserand9mm	24/03/10 01:50 PM
Re: cast loads in 458WM	DarylS	24/03/10 11:19 PM
Re: cast loads in 458WM	mauserand9mm	25/03/10 09:58 AM
Re: cast loads in 458WM	eagle27	25/03/10 05:29 PM
Re: cast loads in 458WM	DarylS	26/03/10 01:00 AM
Re: cast loads in 458WM	greenshoots	26/03/10 06:08 AM
Re: cast loads in 458WM	86thecat	29/03/10 12:55 PM
Re: cast loads in 458WM	mauserand9mm	29/04/10 08:51 PM
Re: cast loads in 458WM	DarylS	29/04/10 10:00 PM
Re: cast loads in 458WM	mauserand9mm	14/03/10 08:43 PM
Re: cast loads in 458WM	eagle27	14/03/10 09:09 PM
Re: cast loads in 458WM	Tatume	14/03/10 10:57 PM
Re: cast loads in 458WM	DarylS	15/03/10 02:52 AM
Re: cast loads in 458WM	mauserand9mm	15/03/10 09:54 AM
Re: cast loads in 458WM	DarylS	15/03/10 10:22 AM
Re: cast loads in 458WM	9dot3x74R	15/03/10 12:19 PM
Re: cast loads in 458WM	DarylS	15/03/10 12:59 PM
Re: cast loads in 458WM	mauserand9mm	15/03/10 02:10 PM
Re: cast loads in 458WM	450_Ackley	15/03/10 06:14 PM
Re: cast loads in 458WM	450	12/03/10 04:56 PM
Re: cast loads in 458WM	DarylS	10/03/10 12:25 PM
Re: cast loads in 458WM	86thecat	10/03/10 05:18 PM
Re: cast loads in 458WM	450_Ackley	08/03/10 02:22 PM
Re: cast loads in 458WM	DarylS	08/03/10 03:25 PM
Re: cast loads in 458WM	mauserand9mm	08/03/10 06:07 PM
Re: cast loads in 458WM	450_Ackley	08/03/10 08:44 PM

Extra information

0 registered and 166 anonymous users are browsing this forum.

Moderator:

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 24665

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved