Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: Proof... once again

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Building Double Rifles & Gunsmithing

oupa
.300 member

Reged: 01/03/06
Posts: 127
Loc: Maryland,USA

Proof... once again
27/10/10 09:50 AM

While this subject is often discussed in regards to the states where we have no official or easily accessable "proof house" the norm or at least that arguably "established" by way of Brown's book is a 30% over load of some sort. I will not go into that debate right now but as this is the first such project I've done since reading it way back when, I was wondering how you guys view the method our own Bramble encountered at the London proof house. That being, simply oiling a pair of heavy (but within spec.) cartridges. I for one am certianly not going to argue with such experts but am curious if others have tryed it. Here's an excerpt from that post with emphisis added;

"...It was an interesting experience. The test itself consisting of taking two of my heavy crimp maximum reloads and librially oiling the cartridges and firing them in a test room that resembles the entrence to Dantes inferno with a huge ammount of powder residue on everything. A nicer bunch of people you could not hope to meet by the way, they let me observe all that was going on and made me a cup of tea to drink whilst wandering around their workshop.
They also decided that the test was sufficient for definitive proof and that I did not need to return the rifle after the ribs were added.

I enquired of course just what additional strain the oiling of the cartridges puts on the action and I was assured that it was in excess of 30%. I was told with some undisguised pride that the same proceedure had recently pushed a .600 by a well known manufacturer off the face. This was before they fired my humble effort (gulp). The excess pressure produced was sufficient to force the primers to extrude into the firing pin holes 0.0085" to the extent that a burr could be removed from the primer with a fingernail on examination."

And a link to the whole thread; http://forums.nitroexpress.com/showflat.php?Cat=0&Number=69065&page=0&fpart=1&vc=1

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
Proof... once again	oupa	27/10/10 09:50 AM
Re: Proof... once again	Birdhunter50	29/10/10 11:41 PM
Re: Proof... once again	Mike_Bailey	30/10/10 12:51 AM
Re: Proof... once again	DarylS	30/10/10 01:35 AM
Re: Proof... once again	GroovyMike	30/10/10 02:10 AM
Re: Proof... once again	450_366	30/10/10 03:04 AM
Re: Proof... once again	oupa	30/10/10 04:39 AM
Re: Proof... once again	tinker	26/12/10 06:48 AM
Re: Proof... once again	DarylS	30/10/10 06:35 AM
Re: Proof... once again	GroovyMike	30/10/10 07:10 AM
Re: Proof... once again	Brithunter	14/12/10 10:33 AM
Re: Proof... once again	DarylS	26/12/10 05:47 AM
Re: Proof... once again	oupa	25/12/10 03:12 PM
Re: Proof... once again	4seventy	27/10/10 03:41 PM
Re: Proof... once again	kamilaroi	27/10/10 06:58 PM
Re: Proof... once again	oupa	28/10/10 03:26 AM
Re: Proof... once again	DarylS	28/10/10 03:57 AM
Re: Proof... once again	kuduae	28/10/10 06:13 AM
Re: Proof... once again	kuduae	28/10/10 06:49 AM
Re: Proof... once again	Huvius	28/10/10 07:36 AM
Re: Proof... once again	4seventy	28/10/10 08:33 AM
Re: Proof... once again	kuduae	29/10/10 07:46 AM
Re: Proof... once again	4seventy	29/10/10 08:26 AM
Re: Proof... once again	4seventy	29/10/10 08:45 AM
Re: Proof... once again	DarylS	29/10/10 10:21 AM
Re: Proof... once again	kuduae	28/10/10 08:10 AM
Re: Proof... once again	4seventy	28/10/10 12:58 PM
Re: Proof... once again	oupa	29/10/10 03:31 AM
Re: Proof... once again	kuduae	29/10/10 07:39 AM
Re: Proof... once again	DarylS	29/10/10 03:30 AM
Re: Proof... once again	kuduae	28/10/10 08:43 AM

Extra information

0 registered and 44 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 3252

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved