Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: BP DGS Slugs !

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Double Rifles, Single Shots & Combinations >> Paradox and Bore Guns

DarylS
.700 member

Reged: 10/08/05
Posts: 27005
Loc: Beautiful British Columbia, Ca...

Re: BP DGS Slugs !
03/08/10 01:56 AM

Looking foreward to that report, Nitro.

Interesting about the roll crimps. When I use round balls, I've had no such problem, but then, I used folded or semi-folded (cone shaped) crimps with once fired plastic hulls.

I have just loaded up a whack of Lyman's slugs in the red 'field' wad, with 34gr. of SR4756 and CCI 209's, folded crimp for my Mossy rifled barrel. This was one of the loads listed in the handloader magazine - at 1,450fps, approximately. The Lyman slugs I have weigh 506gr. in WW alloy.

I have some others to try in/with wads as well - 580gr. from a homemade .687" mould as well as .690" 730gr. 'Original' US military Minnie from a Lyman mould. Both are in pure lead. The mould I bored, can cast up to 1,200gr. weight - much more than I want to shoot.

One aspect of using undersized slugs or round balls, is the total absence of leading. At times, it can be difficult to remove.

A "Kurly Kate" or "Curly Kate" pot scrubber made of copper strands, almost like lathe turnings is a good method of removing leading from rifled as well as smooth bores. There is a stainless 'ball' for cleaning pots that I wouldn't use. The copper scrubbers will not hurt the bore of either smooth nor rifle. Simply snip a 'strand' of copper from the 'ball' and pull them out, then wrap the 'strands' around a wire brush, then wet with a powder solvent and stroke. The lead comes out quickly and easily with the copper strands with those sharp edges cutting it better than steel wool - even from rifles as noted.

--------------------
Daryl

"a gun without hammers is like a Spaniel without ears" King George V

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
BP DGS Slugs !	nitro450exp	20/07/10 11:46 PM
Re: BP DGS Slugs !	DarylS	22/07/10 01:25 AM
Re: BP DGS Slugs !	nitro450exp	22/07/10 03:45 AM
Re: BP DGS Slugs !	DarylS	22/07/10 03:27 PM
Re: BP DGS Slugs !	nitro450exp	29/07/10 12:50 AM
Re: BP DGS Slugs !	DarylS	29/07/10 05:07 AM
Re: BP DGS Slugs !	nitro450exp	02/08/10 11:50 PM
Re: BP DGS Slugs !	BadgerPowell	08/08/10 10:20 PM
Re: BP DGS Slugs !	DarylS	08/08/10 11:08 PM
Re: BP DGS Slugs !	BadgerPowell	10/08/10 06:33 AM
Re: BP DGS Slugs !	DarylS	10/08/10 10:04 AM
Re: BP DGS Slugs !	nitro450exp	10/08/10 10:14 PM
Re: BP DGS Slugs !	DarylS	10/08/10 10:55 PM
Re: BP DGS Slugs !	nitro450exp	10/08/10 11:33 PM
Re: BP DGS Slugs !	DarylS	15/08/10 12:55 AM
Re: BP DGS Slugs !	beleg2	11/08/10 08:58 PM
Re: BP DGS Slugs !	nitro450exp	13/08/10 10:59 PM
Re: BP DGS Slugs !	BadgerPowell	10/08/10 06:01 AM
Re: BP DGS Slugs !	DarylS	03/08/10 01:56 AM
Re: BP DGS Slugs !	nitro450exp	03/08/10 04:47 AM
Re: BP DGS Slugs ! Update with targets.	nitro450exp	06/08/10 04:49 AM
Re: BP DGS Slugs ! Update with targets.	DarylS	08/08/10 02:43 AM
Re: BP DGS Slugs ! Update with targets.	tinker	08/08/10 11:46 AM

Extra information

0 registered and 73 anonymous users are browsing this forum.

Moderator: tinker

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 14444

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved