Home | Ezine | Forums | Links | Contact
NitroExpress.com: Ruger No.1 rechambering question

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies


*** Enjoy NitroExpress.com? Participate and join in. ***

Double Rifles, Single Shots & Combinations >> Single Shots & Combination Guns

fallingblock
.224 member


Reged: 16/06/05
Posts: 32
Loc: Western Wisc.
Re: Ruger No.1 rechambering question
      23/07/10 09:29 AM

I had my .458 re chambered to the .460 G&A #2 which is almost the same as the .500/.450 Magnum works great and is very accurate but the recoil with the 500 grain bullets is a bit much from a rest. I don't have the figures handy as they were lost in an old computer but the velocity was half way between the .460 Weatherby and the .458 Winchester at about 2150fps.
The load I use is 87 grains of IMR 4064.
Cheers,
Laurie

Post Extras Print Post   Remind Me!     Notify Moderator


Entire topic
Subject Posted by Posted on
* Ruger No.1 rechambering question BELTFED 22/07/10 03:47 PM
. * * Re: Ruger No.1 rechambering question bonanza   22/07/10 10:24 PM
. * * Re: Ruger No.1 rechambering question fallingblock   23/07/10 09:29 AM
. * * Re: Ruger No.1 rechambering question bonanza   23/07/10 12:47 PM
. * * Re: Ruger No.1 rechambering question nitro450exp   23/07/10 10:43 PM
. * * Re: Ruger No.1 rechambering question bonanza   23/07/10 10:51 PM
. * * Re: Ruger No.1 rechambering question BELTFED   24/07/10 12:47 AM
. * * Re: Ruger No.1 rechambering question Tatume   24/07/10 01:30 AM
. * * Re: Ruger No.1 rechambering question nitro450exp   24/07/10 04:26 AM
. * * Re: Ruger No.1 rechambering question alexbeer   22/07/10 05:43 PM

Extra information
1 registered and 80 anonymous users are browsing this forum.

Moderator:  Huvius 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 5851

Rate this thread

Jump to

Contact Us NitroExpress.com

Powered by UBB.threads™ 6.5.5


Home | Ezine | Forums | Links | Contact


Copyright 2003 to 2011 - all rights reserved