Forums.NitroExpress.com

Home | Ezine | Forums | Links | Contact NitroExpress.com: 1903 Mannlicher

View recent messages : 24 hours | 48 hours | 7 days | 14 days | 30 days | 60 days | More Smilies

*** Enjoy NitroExpress.com? Participate and join in. ***

You are not logged in. [Login]

Main Index · Search · Active Topics
New user · Who's Online · FAQ · Calendar

Shooting & Reloading - Mausers, Big Bores and others >> Mannlicher Discussion forum & Archive

malco
.275 member

Reged: 11/02/09
Posts: 76
Loc: montana, usa

Re: 1903 Mannlicher
15/07/10 10:16 PM

Hi Curl--
Sorry it's taken me so long to get back to you. Regarding powder, I'd probably start with the data in the Hornady manual, and try to get your velocity up above 2,000 fps for starters, and more like 2,200 ideally, especially if you want to kill deer with it. In my experience, the H4895 data for the 160RN did not produce adequate velocity for a hunting bullet, and it wasn't particularly accurate, either, although the same powder with Hornady's 140 SP did produce good results in my rifle both on paper and on game--I had a lightning-fast, one-shot kill on a prongbuck at 160 yards with this combo last year.

I'm mostly using Norma N204 powder because I have a bunch of it, in a recipe acquired from a friend who in turn passed it along from a '60s-vintage Norma factory loading manual. It seems to work great with the 160RN, and I can get 10-plus firings out of a case even with a pretty hot load. On the other hand, Tatume, who knows a lot more than I do, has suggested that N204 might be too slow a powder for optimal performance.

Given that your gun is as old as it is, and as pristine as it is, I'd definitely start off on the cautious side. My rifle is twenty years newer, and I'd assume that the metallurgy improved over the decades although I don't know that for sure.

A few other things I've encountered: my Reddington dies produce excessive headspace when set to full-length resize in a conventional manner, yet my rifle will not feed a neck-sized-only cartridge through the rotary mag. I wound up smoking the neck of a cartridge and turning down the FL die just to the junction of the neck and shoulder, and this solved the feeding problem while avoiding the headspace issue. I have neck-sized-only for a friend's 1903, and his works fine with such.

I've found that tightening the action screws past index produces better accuracy. Also, I tapped out the metal sleeve that lines the hole for the tang screw in the stock, shaved it back slightly with a Dremel tool and replaced it, which resulted in a tighter action-to-stock fit and better accuracy.

Best of luck, and I'll look forward to hearing more as you work with your new beauty--
Malcolm

Post Extras

Print Post

Remind Me!

Notify Moderator

Entire topic
Subject	Posted by	Posted on
1903 Mannlicher	Farkey	10/05/10 02:48 AM
Re: 1903 Mannlicher	88MauSporter	10/05/10 05:23 AM
Re: 1903 Mannlicher	lancaster	10/05/10 02:02 PM
Re: 1903 Mannlicher	Mike_Bailey	10/05/10 06:10 PM
Re: 1903 Mannlicher	CptCurl	10/05/10 08:54 PM
Re: 1903 Mannlicher	malco	11/05/10 12:05 AM
Re: 1903 Mannlicher	CptCurl	15/06/10 07:34 AM
Re: 1903 Mannlicher	Peconga	15/06/10 12:26 PM
Re: 1903 Mannlicher	malco	15/06/10 02:25 PM
Re: 1903 Mannlicher	Igorrock	15/06/10 05:25 PM
Re: 1903 Mannlicher	kuduae	16/06/10 07:51 AM
Re: 1903 Mannlicher	CptCurl	16/06/10 10:01 AM
Re: 1903 Mannlicher	CptCurl	16/06/10 10:07 AM
Re: 1903 Mannlicher	heers68	23/08/10 06:55 AM
Re: 1903 Mannlicher	CptCurl	11/09/10 10:54 PM
Re: 1903 Mannlicher	RigbyUser	14/08/10 06:22 PM
Re: 1903 Mannlicher	pjaln	28/06/10 10:19 AM
Re: 1903 Mannlicher	malco	28/06/10 01:50 PM
Re: 1903 Mannlicher	pjaln	29/06/10 05:52 AM
Re: 1903 Mannlicher	kuduae	29/06/10 11:36 PM
Re: 1903 Mannlicher	pjaln	30/06/10 12:52 AM
Re: 1903 Mannlicher	CptCurl	01/07/10 08:09 AM
Re: 1903 Mannlicher	NitroX	02/07/10 02:59 AM
Re: 1903 Mannlicher	malco	07/07/10 01:33 PM
Re: 1903 Mannlicher	CptCurl	07/07/10 09:19 PM
Re: 1903 Mannlicher	malco	15/07/10 10:16 PM
Re: 1903 Mannlicher	CptCurl	19/07/10 12:54 PM
Re: 1903 Mannlicher	malco	12/09/10 12:16 AM
Re: 1903 Mannlicher	CptCurl	12/09/10 12:27 AM
Re: 1903 Mannlicher	Rule303	01/07/10 11:25 AM
Re: 1903 Mannlicher	tinker	01/07/10 02:51 PM
Re: 1903 Mannlicher	CptCurl	17/06/10 11:18 AM
Re: 1903 Mannlicher	Carpetsahib	17/06/10 11:31 AM
Re: 1903 Mannlicher	malco	17/06/10 01:05 PM
Re: 1903 Mannlicher	CptCurl	23/06/10 12:58 AM
Re: 1903 Mannlicher	malco	23/06/10 12:00 PM
Re: 1903 Mannlicher	CptCurl	19/06/10 09:04 PM
Re: 1903 Mannlicher	kuduae	20/06/10 08:07 PM
Re: 1903 Mannlicher	malco	21/06/10 12:55 AM
Re: 1903 Mannlicher	CptCurl	21/06/10 12:17 PM
Re: 1903 Mannlicher	kamilaroi	17/06/10 02:57 PM
Re: 1903 Mannlicher	Phillip	18/06/10 10:04 AM
Re: 1903 Mannlicher	Peconga	16/06/10 01:45 PM
Re: 1903 Mannlicher	Farkey	12/05/10 01:00 AM
Re: 1903 Mannlicher	dons	12/05/10 03:29 AM
Re: 1903 Mannlicher	CptCurl	14/05/10 10:06 PM
Re: 1903 Mannlicher	KurtC	14/05/10 11:21 PM
Re: 1903 Mannlicher	Farkey	15/05/10 12:00 AM
Re: 1903 Mannlicher	KurtC	15/05/10 01:16 AM
Re: 1903 Mannlicher	malco	15/05/10 02:44 PM
Re: 1903 Mannlicher	TexasJohn	16/05/10 12:42 AM
Re: 1903 Mannlicher	KurtC	16/05/10 03:13 AM
Re: 1903 Mannlicher	kuduae	16/05/10 04:37 AM
Re: 1903 Mannlicher	CptCurl	16/05/10 12:39 AM
Re: 1903 Mannlicher	Rule303	14/05/10 07:34 PM

Extra information

0 registered and 107 anonymous users are browsing this forum.

Moderator: CptCurl

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 25050

Jump to

NitroExpress.com

Powered by UBB.threads™ 6.5.5

Home | Ezine | Forums | Links | Contact

Copyright 2003 to 2011 - all rights reserved